Question for you 210 owners

[Tx Champ]

On my 07 210, in the rear side compartments, there are 2 4" holes cut. One in the forward wall and the other in the ouotbard wall. I'm assuming these are there for access to the space for running cables, getting to hardware, etc. They are plugged with some plastic 4" hole plugs like the attached pix. I'm needing one, but Sherry at Fishing Holdings can't identify them. Just curious if all the 210s had these holes or may just be something the original dealer may have cut into it.

Thanks!!

[btsmbass]

Replace with this, it will never fall out.
Jim Black and Associates: Jim Black 4 Inch Black Boat Access Cover

[brandonb]

I have an '08 and mine has them. Just a thought but have you tried your local dealer, sometimes my local dealer has odds and ends stuff like that in the back.

[Tx Champ]

Replace with this, it will never fall out.
Jim Black and Associates: Jim Black 4 Inch Black Boat Access Cover

Not a bad idea ... thanks!!

I have an '08 and mine has them. Just a thought but have you tried your local dealer, sometimes my local dealer has odds and ends stuff like that in the back.

My "local" dealer is an ex-Travis Boating Center turned Tracker Boating Center. I don't go by there unless I'm in desparate need and have no other choice. And 99.9% of the time it was a wasted trip ...

[FEARTHETURTLE210]

Hey Reggie..My 08 has them in the rear boxes also. I always thought it was access to wires if needed. Dont have an extra but try an RV dealer sometimes they have similar parts to boats like ours.

[Bassin Bob71]

My 198 has them also.

[Gunnar]

My 198 has them also.

Yep me too...

[barbarian]

Call a current stratos / ranger dealer and see if they can order them for you. The Stratos Elite 210 is probably still using the same part. If not local, they should be able to ship them to you. I have done that on a couple of missing parts.

[Tx Champ]

I'm working with Sherry at Ranger/Stratos/Triton parts. She wasn't seeing them in her parts lists, so I told her I'd find out if they were factory or something maybe done by a dealer. From the responses here, they are definitely factory. She sent an e-mail yesterday to the production manager, but said it would be Monday before he read it. I told her I'd call back Monday and let her know for sure if they were factory. She's been real good about chasing down hard to find items. She's holding a parts order for me until we get this item figured out. Once we get a PN, I'll post it with the rest of the Elite parts listed in my Links & Info post.

[Tx Champ]

Sherry e-mailed me today with the info on the hole plugs. They are $3.32 ea. I added them & 2" gauge bezels to the Info & Links post.

7KE636 4” Hole Plug
7CE05 2” Plastic Bezel

[Gunnar]

You 'da Man Reggie