Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2011
    Location
    San Antonio
    Posts
    8

    2011 250 Pro XS Idle Issue

    Seriel #1B806797. About half the time when I'm in neutral the RPMs stay around 1200. At other time it idles fine at around 600 RPMs. I've pulled-up on the Hot Foot pedal to make sure it wasn't sticking with no effect. The only way to correct this is to turn the motor off and it drops to normal when turned back on.

    Any ideas? And until I get this figured-out, how bad is it to shift into gear at this high of an idle?

  2. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    98,323
    #2

    Re: 2011 250 Pro XS Idle Issue (jpost)

    Do not attempt to shift at this RPM!

    It is IMPERITIVE that the throttle arm (left side of the engine) be returned FIRMLY against it's idle stop screw EVERY time the hotfoot is released.

    More than likely, your problem is a throttle cable adjustment, or hotfoot adjustment problem.



    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  3. Member
    Join Date
    Jun 2011
    Location
    San Antonio
    Posts
    8
    #3

    Re: 2011 250 Pro XS Idle Issue (EuropeanAM)

    Thanks

Similar Threads

  1. OX66 idle speed issue.
    By 201pro in forum Yamaha Motors
    Replies: 3
    Last Post: 08-10-2011, 02:38 PM
  2. 2011 175 Pro XS idle issues
    By knotsure in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 5
    Last Post: 07-17-2011, 05:40 AM
  3. 2010 250 ProXS.. idle issue?
    By DerekG in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 05-03-2011, 04:54 PM
  4. etec 225ho idle issue
    By kkaiser in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 04-12-2011, 01:50 PM
  5. Idle issue
    By jenoble99 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-25-2007, 05:33 PM