08 200 Opti, need to change plugs. Is this a easy DIY project, they dont look real bad to get to but looks like the fuel rail needs to be taken loose. Am I correct?
08 200 Opti, need to change plugs. Is this a easy DIY project, they dont look real bad to get to but looks like the fuel rail needs to be taken loose. Am I correct?
Stroker 21
Mercury 250 PRO XB![]()
TN Bluewater dealer/rep.
BBO
The fuel rails do not need to be moved. A socket with a 3/8 wobble extension will get them out with a little patience. Start the new plugs with a length of fuel hose over the insulator end so you can feel the threads starting square, screw them at least three complete turns before you use a socket to tighten them.
2018 Z521L 250 PRO XS V8
Stroker 21
Mercury 250 PRO XB![]()
TN Bluewater dealer/rep.
BBO
bout a 15 minute job, but be careful and use the hose as was said...you DON"T want to be breaking a plug off on one of those
Daiwa / St. Croix / Abu Garcia / Sufix / Humminbird / Motorguide
T & H / Power Pole / BlueWater / Loc-R-Bar / Bravo 1 / MercMonitor
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by TRCM »</td></tr><tr><td class="quote">bout a 15 minute job, but be careful and use the hose as was said...you DON"T want to be breaking a plug off on one of those</td></tr></table>
And you also don't want to STRIP THE THREADS in the cylinder head....![]()
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor