Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Dec 2011
    Location
    Dunnellon
    Posts
    21

    power pole pump installation locations

    There does not seem to be any good places to for a pump to go in a 20xd. I have 4 batts which does not leave any room for a pump. I was wondering where some of you guys have mounted yours. I know some have dual powerpoles but I can't find room for even 1 pump much less 2.

  2. Member
    Join Date
    Mar 2008
    Location
    Alexandria, KY
    Posts
    2,358
    #2

    Re: power pole pump installation locations (CC_20XD)

    I am not sure how you bildge is set up, but I have seen guys put 3 batteries on the port side. that would possible make room on the starbord side.

    Also I wonder if it would fit under on of the seats. There really isn't much use for that space, but its also not water tight so I dunno how good of an idea that is.

    I always wished that bullet would put another reserve gas tank under the seats. Maybe 12 gallon, that way you could fill it up when needed, but still empty it out and not loose other space or performance.


    Brett Graham
    Louisville, KY
    L\'raisin Anglers

  3. Member
    Join Date
    Dec 2011
    Location
    Dunnellon
    Posts
    21
    #3

    Re: power pole pump installation locations (RoughThumbBG)

    I tried putting 3 batts on the port side but they would not fit, need about 2 more inches. Maybe with some smaller batts for the trolling motor, I use group 31 batts. I had not thought about the space under the seats, I know that space is not considered dry storage but mine stay pretty dry.

  4. BBC SPONSOR
    Join Date
    Jun 2004
    Location
    South Florida
    Posts
    5,851
    #4

    Re: power pole pump installation locations (CC_20XD)

    Options would be to use a smaller 2gal oil tank which i have done for 2 applications. Or mount under seat. I would go smaller oil tank. Giv me a call and i can get you a tank in route if needed. 561 926 2664 Rich

  5. Member
    Join Date
    Dec 2011
    Location
    Dunnellon
    Posts
    21
    #5

    Re: power pole pump installation locations (Hydrilla Gear)

    Thanks, but my oil pump is not an issue it was mounted in the drivers side dry storage to accomodate the 4th batt. I have 2 batts on the starboard side and 2 batts on the port side. If i could get three on the port side i would be good to go, but i tried and could not make three fit on the port side.

  6. Member
    Join Date
    Mar 2008
    Location
    Alexandria, KY
    Posts
    2,358
    #6

    Re: power pole pump installation locations (CC_20XD)

    I would put it in the drive side dry storage with your oil tank then.


    Brett Graham
    Louisville, KY
    L\'raisin Anglers

  7. BBC SPONSOR
    Join Date
    Jun 2004
    Location
    South Florida
    Posts
    5,851
    #7

    Re: power pole pump installation locations (RoughThumbBG)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by RoughThumbBG &raquo;</td></tr><tr><td class="quote">I would put it in the drive side dry storage with your oil tank then.</td></tr></table>

    Oh I see. Your running 4 batteries. I thought you were running 3..

    I 2nd this idea or go under seat.

Similar Threads

  1. Replies: 11
    Last Post: 04-10-2012, 02:24 PM
  2. Custom brackets for Power pole installation
    By Optimax200 in forum Xpress Boats
    Replies: 7
    Last Post: 03-18-2012, 07:41 PM
  3. power pole installation
    By HappyChamper in forum Champion Boats
    Replies: 2
    Last Post: 04-19-2010, 01:46 PM