Looking for a 98 Pro Max 300 Skirt
Merc Part Number 84880141
It's the black plastic trim skirt above the lower unit and below the cowl.
If anyone has or knows about one email me at:
eich1009@bellsouth.net
It went swimming and Merc wants two arms and both legs for a new one.
Here is the rest of her.
98 Bullet 21XDC
98 Merc 300 Pro Max w/ New 2007 3.2 300X Block
15" Set Back W/ Detwilder Hydro Jack
Dyno at Prop 349 HP
Spinelli DR 4 28 - 96 MPH
Spinelli DR 4 32 - 108 MPH
Boat & All Work by Tony Reynolds RIP
Ed, sounds like ya got a pretty hot set up there!!!
Tony did a great job on her!!
how much does merc want for two piecesof plastic ?
Good deal. What kind of RPM are you turning that 32 at?
Modified by Hydrilla at 9:37 AM 7/8/2009
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bulletbob20xd »</TD></TR><TR><TD CLASS="quote">how much does merc want for two piecesof plastic ? </TD></TR></TABLE>
Merc Direct wants a four diget number for the part. Supply & demand I guess, very little supply and very little demand. I haven't priced it from a dealer. Hoping I can find it off a parted out Pro Max.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hydrilla »</TD></TR><TR><TD CLASS="quote">Good deal. What kind of RPM are you turning that 32 at?
Modified by Hydrilla at 9:37 AM 7/8/2009</TD></TR></TABLE>
My brother and I own the boat. He keeps up with the numbers, I'll find out. The 32 was a dealers prop and he did the speed runs.
BTW: Our Bullet has quite a few hours in the Big O. That pic above is in Lake George. We are planning a Fall trip to South Forida. Mind if I pick your brain about the area?
Come on down and bring that boat. I would liike to see how it runs in person...
Is this the motor that was posted in the 3 litre Merc section on this site that was built but didn't have much testing done on it??
What dealer??
Found the Skirt at Boats.net. Good price too.
Hydrilla, We might be fishing Big O in Oct or Nov. Staying in Lakeport. Thinking about fishing Hillsboro one day. Maybe we could hook up unless you have better advise for the Glades. I'll make contact later.
Oh, and about our rig, no I've not posted on that board.
How much did you end up paying for the skirt?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 21XDC300 »</TD></TR><TR><TD CLASS="quote">Found the Skirt at Boats.net. Good price too.
Hydrilla, We might be fishing Big O in Oct or Nov. Staying in Lakeport. Thinking about fishing Hillsboro one day. Maybe we could hook up unless you have better advise for the Glades. I'll make contact later.
Oh, and about our rig, no I've not posted on that board.</TD></TR></TABLE>
Sorry i did not see this post. Give me a shout if its not already to lae and i will check my schedule
I need one for a 98 225 alien promax myself,it went swimming as well.Quoted $799 Cdn,I couldn't stop laughing.
Reply With Quote
