Where can i get some replacement lights that fit in the current locations with little hassel that look cool?
Also anybody got an idea how much it would cost to do the livewell pumpout upgrade?
Thanks Jason
Where can i get some replacement lights that fit in the current locations with little hassel that look cool?
Also anybody got an idea how much it would cost to do the livewell pumpout upgrade?
Thanks Jason
Jason Henson
2018 Phoenix 721 Pro xp Mercury 250 Pro XS
Just gonna get the LED replacements from bullet Thanks .
Jason Henson
2018 Phoenix 721 Pro xp Mercury 250 Pro XS
Both of my bullet LED's have burned out. I watched one dim away. They can not take the higher voltages when the batteries are fully charged and motor running. I was in a night tournament and was idling across the lake and looking at my fish culling. They burned out. My volt gauge showed me 14+ volts. They can not take that like a incadecent bulb.
![]()
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Oh Well I already ordered the LED lights from Tom at Bullet. Got anything else I need To Know that might help me out when I try to do the Pump Out upgrade?
Already ran most of the gas out and i still have a hi-po merc fuel pump to get the rest out so the tank shouldn't be that bad.Was going to put in the order for the flow-rite recirc/ spray head and the other sprayer head later tonight.
Thanks Jason
Its Ok i needed to order a new bullet hat anyway.![]()
![]()
Jason Henson
2018 Phoenix 721 Pro xp Mercury 250 Pro XS
Do a search for livewell or pump out upgrade.![]()
![]()
![]()
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
With regards to the livewell upgrade, it just depends on what you want to replace while you are in there. You can install the Flow Rite heads for less than $30. If you replace all the pumps and the drain valve & cable you can spend $250. Replace the hoses & add another $50. Just a matter of what you need. I added the Flow Rite heads, replaced all my hoses, both pumps with Rule 800 gph, bilge with an 1100 gph auto and replaced the drain valve & cable. Total parts expense: about $300. Tip: tape the hose holes on the back of the tank before removing.