Since I don't have the nads, who's going to do it?

[barchief]

cut the hole in my deck for my recessed trolling motor tray.

I don't think that I have the stomach for it.

[JOHN202]

Not me. Ask Doug he will do it. he has no fear when it comes to working on boats..

[Bump]

Sat. night at the rally about 11 pm I think you would have plenty of volenteers.

[bayoubullet]

[timmaahh12]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Bump &raquo;</td></tr><tr><td class="quote">Sat. night at the rally about 11 pm I think you would have plenty of volenteers.</td></tr></table>

True that! I don't have the nads to cut into my own, but i'll dang sure cut into yours!

[RogerR]

Yep that's a good place to practice Tim.

[barchief]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Bump &raquo;</td></tr><tr><td class="quote">Sat. night at the rally about 11 pm I think you would have plenty of volenteers.</td></tr></table>

THAT's what I was figuring!

[Javarude]

I`ll cut it , I can use the pratice before I cut mine

[RogerR]

The only thing I would worry about is finding out what is under there first.

[SUSHII]

All bs aside. If I was going to let anyone other than myself cut n my boat it would be buddy. That dude is so OCD it can get a little rediculous.

For real. He is the only guy I don't watch over there shoulder every time he is doing something to my boat.

[bayoubullet]

OCD? ...not me

[JOHN202]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bayoubullet &raquo;</td></tr><tr><td class="quote">OCD? ...not me</td></tr></table>

Yea dude, words out on you. I aint coming near your boat..

[fritz20]

I thought we were using Buddy's rig to hold the boiled crawfish? Kind of like those Pirogues caterers use

[Gun Runner]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by JOHN202 &raquo;</td></tr><tr><td class="quote">

Yea dude, words out on you. I aint coming near your boat.. </td></tr></table>I done heard to !!!!!!!

[bayoubullet]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fritz20 &raquo;</td></tr><tr><td class="quote">I thought we were using Buddy's rig to hold the boiled crawfish? Kind of like those Pirogues caterers use </td></tr></table>

[Gun Runner]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fritz20 &raquo;</td></tr><tr><td class="quote">I thought we were using Buddy's rig to hold the boiled crawfish? Kind of like those Pirogues caterers use </td></tr></table>And the beer !!!!!!!!

[SwatDawg]

I will do it for you. I have done 3 to date.

[reelman]

Be sure u look under the deck BEFORE you cut...to be sure of space, etc...and if you have an older boat...put a couple of wooden braces under the floor on each side of the tray...mind at ease then.
Been there.

[Gun Runner]

I got a buddy that was gonna put hole in his front deck for a TM station . He had a 18 ft ranger and wound up cuttin all into his rod box !!!!!!

[DOUGMCGEEFTD]

come on by sometime i can hook you up. I have a metabo and it works good for that. Just make sure you pick you spot before i cut cause there aint no turning back. well we could glass the hole back up and recut but that would be a pain in the azz!!!!!!!!!!!!!!1