What is in tailed in the first year service on this motor and what should I expect to pay?
Thanks
Bob
What is in tailed in the first year service on this motor and what should I expect to pay?
Thanks
Bob
2008 Triton 19x2 225 Opti Pro XS
Here's what we recommend:
-Computer Diagnostic- Check Run History and Freeze Frame (Fault) History
-Compression, Leakdown, or AT LEAST a cyl. Drop Test
-Spark Plugs
-Fuel Filter
-Inspect Oil and Fuel Lines
-Grease all Pivot Points
-Inspect Belt, Tensioner, Compressor & Alternator
-Careful Visual Inpection
-Check Shift & Throttle Cable Adjustments
-Change Gear Lube
-Check for Fishline on Propshaft- inspect hub, grease shaft, and retorque Prop
-Change Water Pump (AT LEAST impeller and gaskets)
-Retorque Steering and Engine Mounting Hardware
-Test or Inspect Thermostats (this CAN be done with the Computer Diagnostic System, as an alternative to "removing" them)
Price will vary.. depending on shop labor rate. See your IM's.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EuropeanAM »</TD></TR><TR><TD CLASS="quote">Here's what we recommend:
-Computer Diagnostic- Check Run History and Freeze Frame (Fault) History
-Compression, Leakdown, or AT LEAST a cyl. Drop Test
-Spark Plugs
-Fuel Filter
-Inspect Oil and Fuel Lines
-Grease all Pivot Points
-Inspect Belt, Tensioner, Compressor & Alternator
-Careful Visual Inpection
-Check Shift & Throttle Cable Adjustments
-Change Gear Lube
-Check for Fishline on Propshaft- inspect hub, grease shaft, and retorque Prop
-Change Water Pump (AT LEAST impeller and gaskets)
-Retorque Steering and Engine Mounting Hardware
-Test or Inspect Thermostats (this CAN be done with the Computer Diagnostic System, as an alternative to "removing" them)
Price will vary.. depending on shop labor rate. See your IM's.
</TD></TR></TABLE>
On avg, how many hours does it take to perform this service?
Shop in Ft Lauderdale Fl qouted me five hours labor plus parts. At 105.00 per hour. And I bought the boat new from them.
Bob
2008 Triton 19x2 225 Opti Pro XS
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Triton Bob »</TD></TR><TR><TD CLASS="quote">Shop in Ft Lauderdale Fl qouted me five hours labor plus parts. At 105.00 per hour. And I bought the boat new from them. Bob</TD></TR></TABLE>
Yikes
I can't speak for "other shops".... but the services listed above are a "packaged" service in our shop (discounted).
Approximately $465-$485, including parts AND labor.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EuropeanAM »</TD></TR><TR><TD CLASS="quote">I can't speak for "other shops".... but the services listed above are a "packaged" service in our shop (discounted).
Approximately $465-$485, including parts AND labor.
</TD></TR></TABLE>
Don thats not bad considering i just spent $165 for 6 plugs... AND I had to put the *&((*&('s in myself!!!!
Don,
Wish you were closer.
Thanks for your help
Bob
2008 Triton 19x2 225 Opti Pro XS
Reply With Quote
