Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Nov 2005
    Location
    Manhattan
    Posts
    2,300

    Made it out Sunday

    Hit a little farm pond this weekend. Never fished it before but most of my ponds have dried up so badly I had to find some new water. There was one piece of pipe in the whole damn chocolate pond. Pitched a senko on the first cast and paused to tighten the cast control (new reel) when I wound down on the slack my line was wrapped around the pipe. Pulled about a 3.5lb out after a couple minutes of him sawing my across the pipe. Gotta love YoZuri. Stuff is tough as nails.

  2. Member PII Magnum's Avatar
    Join Date
    Sep 2005
    Location
    Humboldt KS
    Posts
    30,899
    #2

    Re: Made it out Sunday (chunter_ksu)

    i bought some that you look at and it breaks

  3. Member
    Join Date
    Nov 2005
    Location
    Manhattan
    Posts
    2,300
    #3

    Re: Made it out Sunday (whoza_daddy)

    Really? Damn. What pound test? I haven't had that problem at all. I have used it for quite awhile and the only time I have that problem is when I get a backlash that kinks it up.

  4. Member PII Magnum's Avatar
    Join Date
    Sep 2005
    Location
    Humboldt KS
    Posts
    30,899
    #4

    Re: Made it out Sunday (chunter_ksu)

    that was 15 I got at BPS I got some 8 and its tough stuff

  5. Member
    Join Date
    Nov 2005
    Location
    Manhattan
    Posts
    2,300
    #5

    Re: Made it out Sunday (whoza_daddy)

    Well I throw 15 and 12 quite a bit. I don't have much problem at all with it. I don't get into the lower diameters because it is stiff. I usually use Gama for line below 12. I like that stuff.

  6. Member PII Magnum's Avatar
    Join Date
    Sep 2005
    Location
    Humboldt KS
    Posts
    30,899
    #6

    Re: Made it out Sunday (chunter_ksu)

    i like flurocarbon seguars but it is so damn high I have to try some gamma

Similar Threads

  1. Made it to Massasecum Sunday
    By TMG in forum New Hampshire
    Replies: 7
    Last Post: 11-21-2011, 02:46 PM
  2. Home-made cull system I made.
    By showdawg77 in forum Fishing Tips & Techniques
    Replies: 2
    Last Post: 10-19-2009, 04:22 PM
  3. Well I Made It
    By oiltech09 in forum Louisiana Fishing
    Replies: 18
    Last Post: 09-05-2009, 06:55 PM
  4. Who made cajun boats and where were they made?
    By Cal Ross in forum Cajun Boats
    Replies: 8
    Last Post: 06-13-2007, 05:08 AM
  5. Made it out Sunday
    By cape cod basser in forum New England Fishing
    Replies: 6
    Last Post: 01-31-2007, 03:46 PM