where do i get the soft wear for the e-tec program

[ROBBY MEYERS]

would like to have the program to be able to change rpm 500 to higher to about 700 when musky fishing troll speeds would be ajustable up or down and to set the oil xd-50 to xd 100 and also better dignostics other than the lights off the emm where can i get the program?

[ROBBY MEYERS]

rusty are you there

[Luke]

rustys prob at work but he will get your ques. awnsered
be pacient my freind

[ROBBY MEYERS]

thanks man

[Greg_Z21]

I sent you an IM with the Email address, check with them. That's where I got mine from last time.

It was for a 2003 200HO, but they may have updated versions.

[SEAHORSE]

The E-TEC software is a Windows program and I doubt that it would work for you. After installation, a dealer has to put his dealer number and other information in it to make it work.

So far, the public cannot use the software for E-TEC. FICHT software for the DI motors is still available.

[ROBBY MEYERS]

sure would be nice to have the dealer said they would'nt give it up because they said i would not need them

[jimh]

Seahorse--If I understand your last comment, an E-TEC owner cannot get the application software for making adjustments to his E-TEC engine. I hope that Bombardier changes this policy. My understanding was the application software would be available for a modest charge, and the software would allow customers to have access to a sub-set of the commands and options available in the dealer or serviceman software package.

The availability of this software was, in my mind, an advantage of the E-TEC over engines from other manufacturers which did not offer anything similar to their customers.

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jimh &raquo;</TD></TR><TR><TD CLASS="quote">Seahorse--If I understand your last comment, an E-TEC owner cannot get the application software for making adjustments to his E-TEC engine. I hope that Bombardier changes this policy. My understanding was the application software would be available for a modest charge, and the software would allow customers to have access to a sub-set of the commands and options available in the dealer or serviceman software package.

The availability of this software was, in my mind, an advantage of the E-TEC over engines from other manufacturers which did not offer anything similar to their customers. </TD></TR></TABLE>
This Policy will negatively affect my decision on buying the E-Tec. Because, I am a born tinkerer and if I cannot tinker with it I don't need it.

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DoferGofer &raquo;</TD></TR><TR><TD CLASS="quote">
This Policy will negatively affect my decision on buying the E-Tec. Because, I am a born tinkerer and if I cannot tinker with it I don't need it. </TD></TR></TABLE>


Think about it a moment. There ain't much to tinker with the software on an E-TEC. You can change timing offset, but that's not recommended. You can switch from TC-W3 to XD-100 oil ratio, and you can change the idle on the 2 and 3 cylinder motors only. That's about it.

You can't use the Merc setup because it is for dealers only and has to be "reregistered" every 60 days or so.

Yamaha stuff is expensive and you can't do anything with it either since neither Merc or Yammy has software upgradable ECU's.

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEAHORSE &raquo;</TD></TR><TR><TD CLASS="quote">


Think about it a moment. There ain't much to tinker with the software on an E-TEC. You can change timing offset, but that's not recommended. You can switch from TC-W3 to XD-100 oil ratio, and you can change the idle on the 2 and 3 cylinder motors only. That's about it.

You can't use the Merc setup because it is for dealers only and has to be "reregistered" every 60 days or so.

Yamaha stuff is expensive and you can't do anything with it either since neither Merc or Yammy has software upgradable ECU's.</TD></TR></TABLE>
Awww, just let an old man rant and rave, just to hear himself rave. Peetie-pie makes me shut up most of the time

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DoferGofer &raquo;</TD></TR><TR><TD CLASS="quote">
Awww, just let an old man rant and rave, just to hear himself rave. Peetie-pie makes me shut up most of the time</TD></TR></TABLE>


Not a problem, here at BBC you can drool and babble all you want.

[ROBBY MEYERS]

FREE SOFT WEAR OR 3 YEAR WARRENTY? SOFT WEAR

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEAHORSE &raquo;</TD></TR><TR><TD CLASS="quote">


Not a problem, here at BBC you can drool and babble all you want.</TD></TR></TABLE>

Hossman, I am drooling over the that E-tech 150HO because this X-flow has got me babbling to myself and everyone else. I am going to be in a nut house before I am eight-five.
At sixty-four I have another good thirty years of fishing and crabbing before retire to the rocking chair. Ooh my next thirty years, hmm de-dum-dum, dum
Not as many beers though.

[Bassmeister]

DG, you will be rantin' and ravin' when I'm Gone!!!!