Hey Joe?

[Mike Daleo]

any pics of your Lowrance mounted on the boat. There are some who doubt you had the nerve to do it.

[fishinbrad]

Yeah, I got $10 sayin' he'll give it to us and say "just do it!"... with a big 'ol tear in his eye...

[Mike Daleo]

I know Joe well enough to know he will use his size to keep any of us away from his boat with a drill But I volunteer to do it!

[fishinbrad]

Oh hell yeah! I'm in!!! Joe, just make sure and bring plenty of beer! I'm sure you're going to need it for the heartbreak, and me and Mike are going to need it after you thump our heads for getting too close to the Skeeter with a drill!

[Joe Skeeter]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fishinbrad &raquo;</TD></TR><TR><TD CLASS="quote">Yeah, I got $10 sayin' he'll give it to us and say "just do it!" </TD></TR></TABLE>

Not in a million years!!! Laid on the floor looking up for 30 minutues trying to find some way to mount it without drilling. Ordered the Ram mount yesterday should be in this week. Then the time will be here.

[Daniel]

Joe, I used a 1" hole saw and cut a nice neat hole then covered it with a wire hole cover. Looks good and neat.

[billius]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Joe Skeeter &raquo;</TD></TR><TR><TD CLASS="quote">

Not in a million years!!! Laid on the floor looking up for 30 minutues trying to find some way to mount it without drilling. Ordered the Ram mount yesterday should be in this week. Then the time will be here. </TD></TR></TABLE>

Joe you could just hold the depthfinder in your lap as you run down the lake!

[fishinbrad]

... Or use Velcro or some 3M tape!!!

[flippindrew]

here is my 26c HD that i mounted myself.




ITS WAVING!!!!!!!!!!!!!!!!!!!!!!!

[flippindrew]

I feel your pain!!!!!!!!!! It just about killed me drilling the big hole behind the wire vent!

[mdunc]

Does that RAM mount hold good or does the ball loosen up all the time?

[EdDavisKY]

Get the bigger ram mount and they hold real well, as long as you don't spear anything bigger than 4 ft wave, LOL then you got more to worry about than a ram mounted GPS Both my bow and dash Garmin's on my last rig where mounted on Ram mounts and never had any problems with them at all

[98Ranger461]

The key is when you drill your holes...drill them in reverse it wont crack. It took me almost a year to finally drill all my holes for a blacklight system. Local shops wanted at least 250.00 to install it.

[JR19]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flippindrew &raquo;</TD></TR><TR><TD CLASS="quote">I feel your pain!!!!!!!!!! It just about killed me drilling the big hole behind the wire vent! </TD></TR></TABLE>

Drew where did you find a clam shell vent that big. All I can find is a smaller one.

[flippindrew]

at a boat dealership here in town, if you want i can pick one up for you. drew