Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Sep 2009
    Location
    Viola
    Posts
    198

    E-Tech Sparkplug Timing

    Do the plugs have to be timed with the injectors like on the FICHT engines?

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,201
    #2

    Re: E-Tech Sparkplug Timing (Mark Tr.)

    Not timed but indexed.

  3. Member
    Join Date
    Sep 2009
    Location
    Viola
    Posts
    198
    #3
    ChampioNman I had a plug that was 180 degrees off , would this cause hard starting

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,201
    #4

    Re: (Mark Tr.)

    I wouldn't think so. All gapped a .028 tight? And the rest indexed properly?

  5. Member
    Join Date
    Sep 2009
    Location
    Viola
    Posts
    198
    #5
    All the rest were indexed properly I will check gap.

  6. Member
    Join Date
    Sep 2009
    Location
    Viola
    Posts
    198
    #6
    The plugs were gapped at .032 reset to .028 engine started with no problems. Thankyou ChampioNman.

Similar Threads

  1. Sparkplug and gap
    By Mick A. in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-24-2010, 09:29 AM
  2. My sparkplug has balls!!
    By Champion88 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 06-22-2009, 11:38 AM
  3. Sparkplug fouling...
    By DR Stratos in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 04-09-2007, 07:11 AM
  4. Sparkplug problem
    By DChamp in forum Yamaha Motors
    Replies: 8
    Last Post: 03-21-2007, 03:18 PM
  5. Replies: 1
    Last Post: 09-26-2006, 09:28 AM