NEED HELP !!!!

[klasikwnr]

I have a 2002 Procraft 210 Super Pro with tandem axles of course, and last year a drunk driver hit the trailer, which is now all fixed, and repainted. I am now noticing that the boat is not sitting on the trailer correctly, but I think it may be the winch stand that is off kilter. Visually, it does not seem to be out of alignment, but the boat is sitting roughly 1" to the passenger side of the front roller.

?....Does anyone know if there are replacement stands out there for these trailers since ProCraft is no longer in business or where to find one? Does anyone know who the manufacturer of these trailers would of been?

Any suggestions would be greatly appreciated.........

Gene

[haveme1]

On mine the positioning of the boards points the nose in the correct direction within an inch by running along a hull ridge/channel one side or the other. (I forget what they are called) Maybe a board has moved.

When you say "to 1" of the roller" are you saying the whole roller or just the center of the roller ?

[klasikwnr]

actually it seems as though the roller is perfectly aligned, but the boat itself when pulled on the trailer is off to one side by 1"....but I will use your measurements for the gap, and see if that may be the problem.

I have never touched the bunk board stands, so they should be in the same place they are when the trailer was built...

thanks again!