Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jul 2009
    Location
    Houston
    Posts
    75

    Class A motor home 21 ft. triton 250merc proxs

    Transamz9 or Tom 1 or anyone else. Decided on 29 ft. class a motor home 450 ford motor. Presuming I can maneuver on ramp will this thing be able to back down steep ramp (low water toledo-bend) and or pull boat out without slipping? Anyone with comparable experience?? Gas motor 450 located front of coach.

  2. Member
    Join Date
    Sep 2009
    Location
    Lawrenceburg, Ky
    Posts
    1,774
    #2

    Re: Class A motor home 21 ft. triton 250merc proxs (bigtoon)

    I don't think you will have any problems. You are going to burn some gas though. Let me know how this setup works for ya. I was going to get a MH but figured I would get tired of setting it up and down putting the boat in and out.



  3. Member
    Join Date
    Apr 2006
    Location
    Payson, Arizona
    Posts
    935
    #3

    Re: Class A motor home 21 ft. triton 250merc proxs (transamz9)

    Shouldn't be a problem. Sure it uses more gas than a pickup but the first day you use it you will think how nice it is to be fully rested from a nice nights sleep and not already tired from driving to the lake early in the morning. My 25 footer manuvers just as good almost as my pickup. And the rearview camera makes it easier to put the boat in and out of the water. I don't have the tire spinning with the camper that I do with the pickup because the rear wheels are further forward from the trailer and always dry, in addition to being a dual tire axle.


Similar Threads

  1. 3 litre motor cover 250 ProXs
    By alabamaphoenix in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 9
    Last Post: 02-15-2012, 08:56 AM
  2. Towing 21x2 Triton with Class C RV
    By bigtoon in forum Trailers & Towing
    Replies: 2
    Last Post: 05-10-2011, 05:16 AM
  3. 250 ProXS Motor Covers
    By BADAZZTRITON in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 6
    Last Post: 08-29-2009, 07:17 AM
  4. Anybody spun a hub on a ProXS motor?
    By ss in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 9
    Last Post: 07-31-2009, 02:27 AM
  5. said no to fixing triton and mercury proxs
    By billproxs in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 30
    Last Post: 09-25-2008, 09:59 AM