Have issues with the hubs (bearings and races) going in too far to catch the nut and cotter pin on the exterior of the spindle. Someone said that I may have the wrong reach hubs, and there are shallow and long reach hubs. WTF? Could this be true and is all the problem is?
what is the axle weight rating. Who's hub?
Trailer rated at 2500 lbs., not sure what type of hub. Assume that this is the second set of hubs and were purchased at a local trailer parts store.
Poke your head under the trailer and look for a number on the back side of the hub. If it is a 1062 it will be followed by a -1, -2, or -3. These vary in bearing distances. Check with Waymires to see if they have what you need. They are on the web @ http://www.waymires.com or 1-800-434-4824.
All that is listed is a sticker with a statement that" Titan warrants its hubs".... and stamped in the hub is 05 - 04.
Reply With Quote