When towing my boat I get a loud clunk from my trailer when I take off from a dead stop . I know its coming from the actuator whats is causing this?
When towing my boat I get a loud clunk from my trailer when I take off from a dead stop . I know its coming from the actuator whats is causing this?
there is a small shock absorber in the actuator that is probably worn out, depending on which brand it is, it can be replaced without too much work.
.
.
.
.
" The Government cannot give anything that it doesn't first take from someone else"
" A gun in the hand is better than a Cop on the phone "
You probably have a little slack in your receiver hitch. I used to hear that, may pin that I used to hold the hitch in was a little small for the hole and when stopped it would allow slack. I got a bigger locking pin and the noise was gone.
you either need to rebleed or you have a bad shock...
re-bleed what? an if it is a shock where do I get one an about how much? thank you for the info
rebleed the system....first you need to determine what brand actuator, then get the manual...if it's UFP all the info is here....ufpnet.com...
Its a model A60 . will also need the break away cable
Reply With Quote