Trailer Pin

[John M]

Have a dri-doc trailer for my champion. And have broken off(lost) the pin to lock the trailer receiver on the ball. Haven't been able to find a replacement. Right now I'm using a 1/4 inch bolt, which requires tightening and loosening to hook up and remove from the vehicle. Orginally I had a 1.5 inch pin that was attached to stranded wire on the trailer that had a had a depressed ball in the pin that would lock in the receiver.

Any help locating this type of pin would be greatly appreciated

Tight Lines
John M

[looking4five]

Can you use a 1/4" shank pad lock? I'm not real sure what your setup looks like. But, that's what I use in mine, and it's pretty easy to use.

[R. Charlie]

I suggest going to a farm implement business. They have that type of pin. I use a lock.

[ReelDoc]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by looking4five &raquo;</TD></TR><TR><TD CLASS="quote">Can you use a 1/4" shank pad lock? I'm not real sure what your setup looks like. But, that's what I use in mine, and it's pretty easy to use.</TD></TR></TABLE>
That's what I use on mine - a padlock thru the hole.

[MCPO]

Look here, stainless and locks...
\http://www.qmctechnologies.com/news....oupler%20Locks

[Lyn O. Dyer]

Look on top to find the model of the actuator you have and call me at 800-854-1905 ext.107, Lyn

[John M]

Lynn, thanks will be contacting you. hours of Business?

[flatstick]

I have a Master coupler lock for sale in the Misc section if you are in need of one. let me know

[Lyn O. Dyer]

7 am to 330m pm mon-fri..

[Lyn O. Dyer]

pacific time...