Checking Bearings... Clueless!

[cull25]

Alright here is the deal I am ;looking to get my trailer bearings serviced and it is going to be a couple hundred bucks at a local trailer center. Everyone I know seems to do it themselves. I just dont trust myself with something that is so important and if done wrong could be very bad. To all those out there who service bearings, what are the proper steps to doing this? All I know is that I have Trailer Buddies on two wheels and Bearing Buddies on the other two. I beleive they are 1.98. Trailer is EZ Loader

[Tritonbmc]

Since I usually pay to have mine done, I'm not going through the steps, as I'm sure to miss one. Be patient and Lyn or someone else will respond.

I did it 3 years ago, but vowed to never do it alone again, as I only have one arm and it was truly a pain in the azz for me.

[LookOutForShoals]

http://www.bassboatcentral.com/sttipsbb.htm

This is one of the better write ups I have seen on the procedure. If you follow them and just take your time, you probably would be ok.

[Lyn O. Dyer]

The manual is here ....http://ufpnet.com/PDF/Trailer%20Budd...aintenance.pdf ,
you can print it out....

[Tritonbmc]

http://ufpnet.com/PDF/Trailer%...e.pdf