A little help please.

[ford6x6]

OK, I want to seal a new marine plywood deck and floor.
As I understand it....
Epoxy with fiberglass matting on the edges should get it done.
I'm figuring at least 2 pieces of 4' x 8' plywood front, back and sides.
What kind of Epoxy and I still no nothing about fiberglass?
How much do I need to buy?
Brand names may be helpful.

[Caddis295]

Jim,

This is the stuff I used for my deck:
http://www.acehardware.com/pro...88093

and I used this fiberglass material:

http://www.acehardware.com/pro...od_cs

You will mix this up a small batch each time, until you get used to working with it.

Coat the edges first and then each side once dry. Once you have both sides coated you will apply the resin to the edges and then add the 3" fiberglass strip to the edges followed by saturating the strip thoroughly....allow to dry. Final coat both sides of the decks.

Now is the time to make all the required cutouts and such so you can coat the inside areas.

Good Luck,

Dino

[ford6x6]

Oh yeah,
Thats the stuff.
Thanks Again