Results 1 to 13 of 13
  1. 03-19-2013, 08:39 PM #1
    flip-it
    flip-it is offline
    Banned
    Join Date
    Mar 2013
    Location
    Longmont, CO
    Posts
    758

    Wire loom from the bilge to the outboard questions...

    I have a 96 Basscat PII with a Mariner 200 and im in the process of dressing it up a bit and have a question or two.

    What "coupler" type device do you use to attach the wire loom at the motor and at the boat? Im looking to hide my throttle, gas line and wiring.

    My description might not work so ill go look for pics.
    Thanks
    Reply With Quote Reply With Quote
  2. flip-it
    flip-it is offline
    Banned
    Join Date
    Mar 2013
    Location
    Longmont, CO
    Posts
    758
    #2 03-19-2013, 08:45 PM

    From this... to this...



    Reply With Quote Reply With Quote
  3. Wolfsmurf
    Wolfsmurf is offline
    Member
    Join Date
    Sep 2012
    Location
    Georgia
    Posts
    79
    #3 03-20-2013, 10:27 AM
    The loom in the bottom pic looks like a shop vac hose to me. Looks clean, ima copy that idea.
    Reply With Quote Reply With Quote
  4. Gitzit1179
    Gitzit1179 is offline
    Member Gitzit1179's Avatar
    Join Date
    Nov 2009
    Location
    Upton, MA
    Posts
    274
    #4 03-20-2013, 12:11 PM
    You can buy some of that polyester expandable mesh sleeving from electrical supply places and general industrial suppliers like Grainger or McMaster-Carr etc. I believe it come in sizes up to about 2 inches or so in diameter.
    Mark M.
    1998 Champion 181 / Mercury 4S 150 hp PRO XS

    "You have two ears and one mouth, use them in those proportions"
    "Eat your breakfast alone, have lunch with friends and give your dinner to the poor"
    Reply With Quote Reply With Quote
  5. 2old2care
    2old2care is offline
    Member
    Join Date
    Feb 2010
    Location
    Living on the water
    Posts
    679
    #5 03-20-2013, 01:04 PM
    T-H carries what you want, also EBay under marine rigging.
    Reply With Quote Reply With Quote
  6. flip-it
    flip-it is offline
    Banned
    Join Date
    Mar 2013
    Location
    Longmont, CO
    Posts
    758
    #6 03-20-2013, 01:39 PM
    Quote Originally Posted by Wolfsmurf View Post
    The loom in the bottom pic looks like a shop vac hose to me. Looks clean, ima copy that idea.
    I know years ago a guy on here used a vac hose ans it turned out good, I was more worried about connecting it cleanly to the outboard but it appears E-bay will have what I need.

    And I already had the woven stuff on it but it was old and nasy so im looking for a change.
    Reply With Quote Reply With Quote
  7. flip-it
    flip-it is offline
    Banned
    Join Date
    Mar 2013
    Location
    Longmont, CO
    Posts
    758
    #7 03-20-2013, 01:39 PM
    Quote Originally Posted by 2old2care View Post
    T-H carries what you want, also EBay under marine rigging.
    10-4 Im off to E-Bay.

    Thanks guys
    Reply With Quote Reply With Quote
  8. flip-it
    flip-it is offline
    Banned
    Join Date
    Mar 2013
    Location
    Longmont, CO
    Posts
    758
    #8 03-20-2013, 01:50 PM
    For those interested...T H Marine Black Rigging Flange 2" RF1DP | eBay

    T H Marine 2 inch ID Rigging Tube Kit Black w Flange | eBay
    Reply With Quote Reply With Quote
  9. flip-it
    flip-it is offline
    Banned
    Join Date
    Mar 2013
    Location
    Longmont, CO
    Posts
    758
    #9 03-20-2013, 01:50 PM
    What do I need on the outboard side?
    Reply With Quote Reply With Quote
  10. billnorman1
    billnorman1 is offline
    Member
    Join Date
    Apr 2012
    Location
    Insomnia, near Seaford Delaware
    Posts
    37,498
    #10 03-21-2013, 04:24 AM
    I used shop vac hose too. Looks good, no problems.
    Reply With Quote Reply With Quote
  11. arjone01
    arjone01 is offline
    Member arjone01's Avatar
    Join Date
    Oct 2006
    Location
    Hopkinsville, KY
    Posts
    10,103
    #11 03-21-2013, 08:32 AM
    I've made two using the $12 shop vac hose kit from Lowes. On the Mercury there is a plastic insert that fits into the lower pans that conforms the wires coming int. I take that piece, open it up, then using angle blackets I attach a hose fitting with a female coupler to it. Then run your wires, and that fitting bolted to that pan piece makes for a solid connection of the hose, just as the nice Mrcury one on the Pro XS's. All for under $15 as well.
    Reply With Quote Reply With Quote
  12. wakepics
    wakepics is offline
    Member wakepics's Avatar
    Join Date
    Jun 2011
    Location
    Burlington, On
    Posts
    245
    #12 04-14-2013, 09:22 PM
    Quote Originally Posted by arjone01 View Post
    I've made two using the $12 shop vac hose kit from Lowes. On the Mercury there is a plastic insert that fits into the lower pans that conforms the wires coming int. I take that piece, open it up, then using angle blackets I attach a hose fitting with a female coupler to it. Then run your wires, and that fitting bolted to that pan piece makes for a solid connection of the hose, just as the nice Mrcury one on the Pro XS's. All for under $15 as well.
    Do you have any photos of how you've attached the angle brackets/coupler? I think I understand but a visual would help!
    Reply With Quote Reply With Quote
  13. arjone01
    arjone01 is offline
    Member arjone01's Avatar
    Join Date
    Oct 2006
    Location
    Hopkinsville, KY
    Posts
    10,103
    #13 04-15-2013, 09:39 AM
    Yeah, I will try to take some today. Send me your email address and I'll drop them to you.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »