quick question

[matt400TDC]

I'm wanting to get out on the boat this sat. because the weather is supposed to be nice here, but i have an aereator pump w/ a small crack in it. I don't want to spend the money to replace it as I am leaving for Colorado in two weeks. So my question is, has anyone here ever put like bondo or some kind've bonding material on a crack on a pump. I believe it's just a hairline crack and there's no real water pressure on it and I don't intend on using the aereator this weekend? Any suggestions would be appreciated.

[spiffey28694]

try a lil bit of silicone

[matt400TDC]

will def. try. it's a pretty small crack but it sure does let some water in quick. Of course this is only a temporary fix until winter vacation is over.

[bucketmouth4]

Some 5 minute epoxy will fix it right up. Had that happen ,epoxyed it and used it like that for two years. Silicone will work fine short term also.

[matt400TDC]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bucketmouth4 &raquo;</TD></TR><TR><TD CLASS="quote">Some 5 minute epoxy will fix it right up. Had that happen ,epoxyed it and used it like that for two years. Silicone will work fine short term also.</TD></TR></TABLE>

good deal, that's what I like to hear. Thanks!

[Skeet'r89]

What about some pvc glue. Use a small paint brush to apply to crack. Just a thought, don't know if it will work or not.