Well guys its been little over a month and I'm ready to fire up my 1st outboard rebuild! I only need alittle help remembering where the port & starboard equilzing tubes ( black plastic tubes connected to the carberator bases) ,the Crankcase drain tube ( the one thats on the bottom front of crankcase) & the small tube thats on the top connected to the vapor pump (the one thats about 7 inches long that stick up on the center top of engine) connect to.
fingers are crossed and eyes wide open!
2006 RANGER 519VX
200HP MERCURY OPTI-MAX
Sole member of " THE FISHERMEN FOR LIFE" a fisherman that knows one can make the difference!!
I'm going ot be pulling the air cover off mine to set up the hotfoot. I'll take several high res photos send me your email.
1996 STRATOS 278 V
1996 Intruder 150 HP
Model 150GLEDB Serial # 04148601
1991 335195 Heads
FICHT Reed Cages
Chris Carson Carbon Fiber Reeds
Large Bore Carbs
Prop Mark Croxton A45 15" X 23 Tempest
Props Owned/Tested: 23 Renegade, 23 Renegade B&B, 22 Raker, 24 Raker, 24 Raker B&B, 26 Raker, 26 Raker II, 24 Raker II, 23 Tempest, 24 Tempest, 24 Fury, 24 Trophy, 25 Renegade, 27 Renegade, 23 Razor 3.
that will help greatly.
thanks mike!
2006 RANGER 519VX
200HP MERCURY OPTI-MAX
STILL SCRATCHING MY HEAD ON THE LOSER CRANK CASE HOSE
2006 RANGER 519VX
200HP MERCURY OPTI-MAX
It might have been better if i scanned these. let me know if you need better pics.
Ranger 198p
Yamaha 150 SHO
Atlas jackplate
Ultrex I-pilot
2 Solix 12's
Hummingbird 360
Rigid deck and trolling motor lights.
thanks but the hoses i need are not the small hoses but the large hose hooked to the carb equalizing tube just in front of those and the one that hooks to the front crankcase cover ventnipple located very bottom port/passanger side of engine....thanks great pic tho!
2006 RANGER 519VX
200HP MERCURY OPTI-MAX
Reply With Quote
