Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2010
    Location
    TN
    Posts
    82

    2003 evinrude 225 h.o. hard to crank

    Hello guys need some help. I have a 2003 evinrude 225 h.o. when I try to crank it for the first time of the day does't want to idle. It idles at a very low rpm at first, almost like it starveing for fuel. I can rev it up a couple of times and it will begin to idle correctly. When I idle out to blast off it will shut off just like you turn the key off,it will crank right back up then do it again. After 4 or 5 times the check engine light will come on. Turn the key off and back on and the check engine light will go back off . This might happen 4 or 5 times. When I blast off engine will run fine. Idles fine . Starts fine. For awhile! Then sometimes, but not every time, when i take off it will shut off just like you turn the switch off and imediatly back on. seems to happen worse the more load you put on the boat. I've put a new fuel pump on it ,new plugs and a new crank position sensor. Thoughts anyone. Thanks.
    2003 Stratos 201 Pro xl
    2015 Evinrude Etec 250ho G1
    8" Bobs Action jack with gauge
    HDS 12 console, HDS 9 and Onix 10si at Bow, Point One
    112 Minn Kota Ultrex link

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,084
    #2

    Re: 2003 evinrude 225 h.o. hard to crank (brad4158566)

    Change the fuel filter? Sounds like water in the fuel. A diagnostics check can give you any codes.

  3. Member
    Join Date
    Mar 2010
    Location
    TN
    Posts
    82
    #3

    Re: 2003 evinrude 225 h.o. hard to crank (Bassmeister)

    Cheap fix if that is it. But I had diagnostics ran last fall when it started this they showed 1 fault it was the crank sensor they put one on . Didn't fix it. Forgot to say that primer bulb seems messed up think that could be it.
    2003 Stratos 201 Pro xl
    2015 Evinrude Etec 250ho G1
    8" Bobs Action jack with gauge
    HDS 12 console, HDS 9 and Onix 10si at Bow, Point One
    112 Minn Kota Ultrex link

  4. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,579
    #4

    Re: 2003 evinrude 225 h.o. hard to crank (brad4158566)

    +1 on water in the fuel, could also be a clogged exhaust pressure sensor. Has it been de-carbed lately?
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

  5. Member
    Join Date
    Mar 2010
    Location
    TN
    Posts
    82
    #5

    Re: 2003 evinrude 225 h.o. hard to crank (Danrude)

    I keep ring free in it all the time and do a shock treatment at the begining of each year. Dont think that would be the problem. Takinking it out tommorrow with new filter to see if that is it. If not going to take it in to a professional. thanks for the input.
    2003 Stratos 201 Pro xl
    2015 Evinrude Etec 250ho G1
    8" Bobs Action jack with gauge
    HDS 12 console, HDS 9 and Onix 10si at Bow, Point One
    112 Minn Kota Ultrex link

Similar Threads

  1. Replies: 5
    Last Post: 12-02-2010, 12:29 PM
  2. 2003 225HO - Hard starting
    By Rude520 in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 02-19-2009, 10:13 AM
  3. 2003 OX66 225 Prime Bulb not staying hard
    By Justin T - CT in forum Yamaha Motors
    Replies: 7
    Last Post: 06-17-2008, 08:14 PM
  4. Hard to start and missing 2003/225 Evenrude HO
    By Wildcats in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-30-2008, 05:53 PM