Does anyone know what kind of rod tips that are on the Loomis IMX series, and also where can you purchase these? I am looking for some replacement tips for several rods.
Does anyone know what kind of rod tips that are on the Loomis IMX series, and also where can you purchase these? I am looking for some replacement tips for several rods.
There are 2 different measurements that you need to order a new tip and usually they are different from rod to another. If you can give some model numbers of the rods maybe one of us has replaced a tip on it before and we can give you the numbers, otherwise you'll need some caliper's to take the measurements for yourself.
I am looking for replacement tips for these rods in the IMX series: 844-843-783 also in the CBR series: 783-845, thanks..
The CBR 783 should have a 6 ring and 5 tube
845 should be a 6 ring 5.5 tube
All of the IMX's should be a 6 ring and 5 tube. I know the 844 and 843 are.
Unless I'm mistaken they all should have Fugi Alconite guides on them too as long as they didn't use recoil guides. Hopefully someone will correct me if I'm wrong on that. Give it a little bit and hopefully if I'm wrong someone will correct me. I've worked on the CBR 845 and the IMX 844/843 but the other's I'm just going by a supplier's site that has the tip size of the blank's listed.
Here's some supplier's to call.
http://www.mudhole.com/
http://www.anglersworkshop.com/default.aspx
http://www.fishsticks4u.com/
http://www.customtackle.com/cg...r=cts
Make sure and call them. Some of them don't keep up with their websites very well.
Reply With Quote