is there any kind of repair for a hole in a cork handle. It kind of a little slice like and orange slice but little 3/8x1/4 is there a putty type filler that can be applied if so where do I get that at. Or what kind of glue do I use if I just cut a replacement piece out of another cork handle.
Bass Cat Puma FTD Mercury 250 Pro Xs
......................................<u>Motorguid e, Abu Garcia, Pflueger, Toyota Trucks, Cooks Go-to-Tackle System</u>............................................
2 ways I've found best for me is.
#1 go to your local hobby shop and a pack of small corks, Shave/cut one to the size ya need (a touch bigger is best) apply wood glue and place in hole. When it is dry, take a razor knife and trim to level with the handle.
#2 take some cork dust and mix with wood glue to make a paste about the consistency of tooth paste. Put this in the hole and let dry. Make sure you wipe any excess. this will make the sanding easier. When it's dry, take a fine grit sand paper and sand smooth and level with the handle.
Keep the Lord first in your heart, life and all that you do. Everything ealse will fall into place.
.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Investor in redneck precious metals. Brass & Lead.
Reply With Quote
What he said.