Modifying Do-It Jog Mold

[C-Man]

Guys,

I am thinking about modifying a Do-it jig mold with JB Weld, my question how difficult will it me to get my mold back to its original state if I want to remove the JB Weld?

Thanks in advance

[5inthebox]

Actually its not that bad. When i modified mine, i dremeled too much and caused it to fill in the eye of the hook. So, i filled that part on the mold with devcon 2 ton epoxy, then dremeled the expoxy to fit the hook. Works perfect.