Need roundhead/shaky head style jig mold

[Mark Perry]

Anyone know of any places I can buy one? Want to start pouring my own. Really prefer one that has 1/8, 3/16, and 1/4 sizes with 2/0 or 3/0 hooks. Thanks

[20_lb_sack]

RWR-3-AYS is the Do-it mold number for the Eakins style jig in those sizes, you could close the weed guard hole and use it. I've been thinking about getting it myself.

[jigfisherman]

I use the do-it production molds with a eagle claw 574 hook, and I use a straight piece of wire and twist it into shape after I pour it. To get the wire too go in the mold I found the wire that I need and laid in the mold were it should go and hit it with a hammer without the hook in it, when i get ready to pour them I bend the wire so it will wrap around the hook an not come out after its poured.