I am looking for some reasonable priced shad minnow plastics (3" to 4") for an A-rig. Anyone have anyone have any places on here that might have them?
I am looking for some reasonable priced shad minnow plastics (3" to 4") for an A-rig. Anyone have anyone have any places on here that might have them?
Stratos 295 PE, 150hp V-Max, Bob's jackplate, Power Pole.
Bass Tackle Depot or The Tackle Trap... Zoom swimming flukes work well and are very reasonably priced. They have good action and i kinda like the solid body compared to hollow body swimbaits when rigged on a jig head. I like Hammer Heads cause I had some but mose swimbait heads should work fine.
Besides the 2 i listed Many, if not most, board sponsors have great options! I just know these 2 carry swimming flukes which I found to work well on a jig head and they're cheap
On a 5 bait 'bama rig - use 4 mini-dippers or smaller swimming flukes on the outside drops. Grubs will work as well. On the longer center drop - use a small Yum money minnow. They'll be focused on the back bait - it's the one that needs to be the most realistic. No need to spend a lot on painted jigheads. I just run unpainted 1/8oz on the outside heads & 1/4oz on the middle - all with 5/0 hooks. Just make sure the jig heads are medium to lighter wire - you will get hung up and it's easier to re-bend a hook as lose the whole rig.
Where did you find your jigheads or what kind are they?
Yeah, the 1/8oz 5/0 are a jig I need a few of...where did you find them?
Where are the BIG ones? When are we going?
LOOKING for a Great deal on a Slightly used 20-21' Boat.
roboworm has them on the sponsors page
THANK YOU - I will be ordering some for the spring to slow roll paddletails.
Where are the BIG ones? When are we going?
LOOKING for a Great deal on a Slightly used 20-21' Boat.
Reply With Quote