Thread: High RPM's

Results 1 to 4 of 4
  1. #1
    Member dlewis10's Avatar
    Join Date
    Jan 2009
    Location
    Tamaqua, PA
    Posts
    4,294

    High RPM's

    I had my Champion out for a little night fishing the other night. Conditions were perfect for running at night - cool, no wind, full moon, and no other boaters on the lake. I usually don't push it at night, but decided to let her rip on a stretch where I knew there was no danger. As I approached WOT, RPM's seemed very high. Tach was giving me 6500, and I had just a tad more to push. This seems way too high for my evinrude intruder 1991 150HP with a 21 pitch raker (no jack plate). I only remeber seeing close to 6000 RPM's on one other occasion. I usually see 5600-5800 RPMs on most days. Could the calm cool conditions give me that much more, or is there something wrong with the tach ??? Or is there something else that needs to be looked into ??
    1993 Champion 190
    1991 Evinrude Intruder 150

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,177
    #2

    Re: High RPM's (dlewis10)

    Cool running Mon !!

  3. Member dlewis10's Avatar
    Join Date
    Jan 2009
    Location
    Tamaqua, PA
    Posts
    4,294
    #3

    Re: High RPM's (ChampioNman)

    Fred, your right - it felt great running . But, good or bad to hit 6500 RPM's ???
    1993 Champion 190
    1991 Evinrude Intruder 150

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,177
    #4

    Re: High RPM's (dlewis10)

    6500 not good may want to go with a bigger prop you should be able to turn a 24" raker on your boat.

Similar Threads

  1. Replies: 1
    Last Post: 05-22-2011, 08:04 AM
  2. gas high in FL
    By allisonxb2003 in forum Virginia Fishing
    Replies: 3
    Last Post: 03-08-2011, 04:44 PM
  3. How high is to high
    By haleconst in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 5
    Last Post: 05-14-2009, 03:27 PM
  4. rooster tail. How high is too high?
    By Cobraboatowner5times in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-14-2007, 03:26 PM
  5. ok tell me if i got the pad high right
    By jimlmackjr in forum Kansas Fishing
    Replies: 6
    Last Post: 04-03-2006, 08:58 AM