MONO VS FLUOROCARBON

[skeetsRus]

Just wanted to know who uses whcih line for what. All fluoro or both for each individual technique

[20_lb_sack]

I use mono for crank baits, braid for flipping wood and spinnerbaits, and Fluorocarbon for the bottom bouncers like jigs, rigs, and shakey heads. I haven't started using fluorocarbon for crank baits yet, but I should give it a try.

[Beast96Z]

I've pretty much gone to all flourocarbon. I have 1 braid rod for my frogs, but that is it. I also have a back up spinning reel with 10lb. mono for those those tough days and the fish want a slow falling senko. Other than that, all flouro.

[AveryF]

I use monofilament for topwaters and fluorocarbon for just about everything else.

[Munkin]

Spinnerbaits= Mono or Floro
Cranks, jigs= Floro
Topwater= Mono

[skeetsRus]

Cranks - Floro
Frogs/Toads - Braid
everything else - mono

[THKUSTOMS]

I hardly ever use a true mono as it has way too much stretch..
Floro I use for everything vertical
spinnerbaits I use a copoly
cranks Ill use floro or a nylon like shooter defier or similar.
same with Tops..

[MFD911]

I really have begun to like the Berkley 100% Flourocarbon. I use it on shakeyheads, T-rig, Cranks, Jigs, it is awesome. Have braid for flippin. only have mono on top-water.

[fishcraze]

I use 100% Floro on everything but topwater, the only other exception is on a stiff CB rod I'll use
p-line floroclear, little more stretch. But I've got away from that somewhat and just use 100% with a more forgiven rod action.

good luck,

Danny

[Legend Chris]

flouroclear
Power Pro Braid

[DTS]

Braid for flippin and froggin mono for the spinnerbait and floro for everything else!!!

[Preston]

braid for flippin, froggin, any kind of walking topwater(spook,sammy), 30# braid always for lipless crankbait around grass.
mono for prop or chug topwater
floro for EVERYTHING ELSE!

http://www.prestonclarkinc.com/

[charger19]

do you use the same knots with floro?

[tnbassin]

Hello Preston, what Flourocarbon line do you use?

[gatrboy52]

i went back to useing mono on all my rods except one i use for deep and or clear water apps.big game i can change it every time out if i want .w/ flouro it was to cost prohibitive to change as often and i was breaking off too much. that doesnt include my rods w/ braid.

[bluegambler]

I use 50lb power pro on everything,with a leader of big game.Never change the line just leader depending on where Im fishing,even gives a little stretch with trebles.

[bassman11]

Pitching docks: Flouro
Flipping grass: Braid
Topwater: P-Line Flouroclear (It's not 100% Flouro, it only has a coating of flouro; therefore it is way less dense AND still totally invisible to the fish)
EVERYTHING ELSE: Flouro
Good luck

[Preston]

Trilene 100%

[T Mike]

I'm a fluoro guy but I don't have alot of heavy cover in my clear spotted bass waters.

Here is a little article I wrote a few years ago on the advantages and disadvantages of fluorocarbon that might help.

http://www.westernbass.com/dot...=2461

[BassTackleDepot]

I use a co-polymer on nearly all fast moving reaction baits and fluorocarbon on jigs, worms, jerkbaits etc.