Tryign to pull the flywheel on a evinrude ficht. Its a 2004 225HP. i am using a harmonic balancer puller but it won't budge. I have removed the big flywheel nut. It actually pulled some of the threads out of one or the three holes for the smaller screws. Anything I am missing? Also, can anyone verify the size bolts needed for the three holes on top of the flywheel?
Modified by jeffro22 at 11:06 AM 8/20/2009
5/16 fine 24 pitch spray some PB blaster around the crank and let is sit for a bit.
Make sure you bottom them out get 3.5" long.
got it off finally. that thing was really on there. It bent all my washers before it finally "popped" loose. Had to sue a breaker bar and thought i was going to ti[ the engine stand over
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman »</TD></TR><TR><TD CLASS="quote">We use air. </TD></TR></TABLE>
Yessir, somefin about that vibration seems to help!! 'Reckon that's why wimmins like....well nevermind..
Reply With Quote
