94 Intruder 150 E150GLERA 03524517 The bushings where the motor rotates up and down are worn, I just noticed it yesterday. My question is how much trouble will it be to change them out? Also if anyone might know the part# that would be great.
Thanks, Phil
2022 Xpress H17 - Yamaha SHO 90
After looking a little closer I dont think there are any bushings in there.
Theres not alot of slop but I noticed it moving when I put my transom saver on, and I can grab the lower unit and wiggle it sideways and it slops up and down on one side .028.
I might have to take that bracket off and bore it out and put some bushings in it unless I can find another bracket somewhere.
2022 Xpress H17 - Yamaha SHO 90
A picture is worth a thousand words when it comes to questions like this.
2022 Xpress H17 - Yamaha SHO 90
There are plastic bushings around the tilt tube on your motor. The tilt tube nuts could also be loose causing a wobble.
go to http://www.shop.evinrude.com , click on parts and look up your particular motor for a drawing of these.
-----
A Technical troubleshooter possessing more tools than talent !
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEAHORSE »</TD></TR><TR><TD CLASS="quote">
There are plastic bushings around the tilt tube on your motor. The tilt tube nuts could also be loose causing a wobble.
go to http://www.shop.evinrude.com , click on parts and look up your particular motor for a drawing of these.</TD></TR></TABLE>
Thanks Seahorse I found what I need thereyou just gotta love BBC
2022 Xpress H17 - Yamaha SHO 90
Reply With Quote
