Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jun 2008
    Location
    kirbyville tx
    Posts
    178

    01 225 rude ram tilt trim

    i have a 2001 225 evinrude rude ram if it matters. my tilt and trim is weak and slow. dont know if its normal but drove a buddies boat the other day and its way faster. when i hit my button down, just bump it. it will drop another 1/2 in or so before it stops. may just be low on fluid. i found the release to let it down manuel but dont see where i can check to fill it or to see if it needs fluid. all i need to know is where to check this at and if you have any idea on anything else that it could be. motor is not running any different but have lost about 4 mph on gps. does not seem to be getting trimmed all the way out. let me know what you think.

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,173
    #2

    Re: 01 225 rude ram tilt trim (mbroussard)

    Trim your motor all the way up. Support it on the trailer bracket and look on the right side of the trim assembly you will see a reservoir there. I has a large slot screw cap. That is where you add the fluid to. If you open it up and fluid comes out you are OK. If not that is where you add it.

Similar Threads

  1. Evinrude Power Tilt Question - '80 140hp Trim/Tilt Fit '89 40hp ???
    By hsdtech in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 02-26-2012, 04:10 AM
  2. tilt n trim unit cant geet tilt cylinders apart
    By Frank A in forum Evinrude/Johnson Motors
    Replies: 11
    Last Post: 01-09-2012, 04:29 AM
  3. 79 rude trim issue
    By georgeo in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 09-08-2007, 09:10 PM
  4. Rude will not trim up
    By spinabait in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 07-20-2006, 07:18 AM
  5. 1990 Rude 200 XP - trim/tilt?
    By DG in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 12-14-2005, 04:36 PM