Page 1 of 2 12 LastLast
Results 1 to 20 of 24
  1. #1
    Member
    Join Date
    Mar 2009
    Location
    Holly MI
    Posts
    99

    Johnson 175 Problems.... Please Help

    I have a 2000 johnson 175 on my Javelin. I began having problems last week and am rather concerned.. So it begins, I was running across a lake and 3 or so miles in the motor gets a loss of power/ RPM's goes from 5500 to 4000 @ WOT. I continue the tourny with trouble getting on plane all day and only being able to turn 4000 R's once again.... next morning initial run across the lake very good until 3 or 4 miles in and again the same problem..... now it has barley enough power to put up on plane. and it idles somewhat rough with some vibration.. I have spark in all 6 cyl. I have good compression I have replaced the fuel filter pulled out all the gas and replaced with fresh gas. checked and changed my plugs. I have read I t could be the stator, but too much money to throw parts at it. any ideas.


  2. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #2

    Re: Johnson 175 Problems.... Please Help (sskuschel)

    Have you pulled a gear case drain plug?

  3. Member
    Join Date
    Mar 2009
    Location
    Holly MI
    Posts
    99
    #3

    Re: Johnson 175 Problems.... Please Help (ELGIN)

    as in the lower unit???? No. I might add while i was running across the lake after the motor lost power it occasionally had little jolts of power but never came back completely.

  4. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #4

    Re: Johnson 175 Problems.... Please Help (sskuschel)

    Sounds like you have an ignition problem, stator, EET or pack.

    First choice is the pack but that would be a check it, dont just buy one.

  5. Member
    Join Date
    Mar 2009
    Location
    Holly MI
    Posts
    99
    #5

    Re: Johnson 175 Problems.... Please Help (ELGIN)

    how would one go about checking the pack? and is this the coil pack you mean or the power pack?

  6. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #6

    Re: Johnson 175 Problems.... Please Help (sskuschel)

    Power pack and you may want to have a technician test it.

  7. Member
    Join Date
    Nov 2008
    Location
    Glasgow
    Posts
    742
    #7

    Re: Johnson 175 Problems.... Please Help (ELGIN)

    Sounds identical to the problem I had this morning. Did you ever find the solution?

  8. Member
    Join Date
    Mar 2009
    Location
    Holly MI
    Posts
    99
    #8

    Re: Johnson 175 Problems.... Please Help (javelin377)

    No, not yet the I left it in the hands of the professionals, currently my motor is apart and being looked at. but after a day of looking the mechanic is still unsure?????????? as soon as I figure it out I will let you know. kinda worried about having to drop some major coin on this thing.

  9. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,137
    #9

    Re: Johnson 175 Problems.... Please Help (sskuschel)

    Is the tech OMC/BRP certified? Or a I'll take a look at her?

  10. Member
    Join Date
    Mar 2009
    Location
    Holly MI
    Posts
    99
    #10

    Re: Johnson 175 Problems.... Please Help (ChampioNman)

    ok. I had some confusion when talking to the tech yesterday. Upon doing a routine inspection on the motor he found major damage to my lower unit and is wondering how it was still functioning. (Pinion Gear and Forward gear damaged) . He is rather positive it is a power pack issue but has to finish the lower unit before lake testing. I'd have brought you the boat but gas @ $3 a gallon and you being 800 miles away doesn't figure into the budget but thanks.

  11. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,073
    #11

    Re: Johnson 175 Problems.... Please Help (sskuschel)

    What Fred was saying, was he a mechanic that said he would look at it or a BRP/OMC technician

  12. Member
    Join Date
    Mar 2009
    Location
    Holly MI
    Posts
    99
    #12

    Re: Johnson 175 Problems.... Please Help (Bassmeister)

    oh. yes it is a johnson/evinrude certified tech looking at the motor.

  13. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #13

    Re: Johnson 175 Problems.... Please Help (Bassmeister)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bassmeister &raquo;</TD></TR><TR><TD CLASS="quote">What Fred was saying, was he a mechanic that said he would look at it or a BRP/OMC technician</TD></TR></TABLE>

    (Is the tech OMC/BRP certified? Or a I'll take a look at her?)

    Mike, Fred, I think you both had to much when you posted on this one.

  14. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,073
    #14

    Re: Johnson 175 Problems.... Please Help (ChampioNman)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">Is the tech OMC/BRP certified? Or a I'll take a look at her? </TD></TR></TABLE>
    Read it again SLOWLY Sir........

  15. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,137
    #15

    Re: Johnson 175 Problems.... Please Help (Bassmeister)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bassmeister &raquo;</TD></TR><TR><TD CLASS="quote">
    Read it again SLOWLY Sir........ </TD></TR></TABLE>

    Hell Elgin it was 8:48 AM I was on my second cup of .

  16. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #16

    Re: Johnson 175 Problems.... Please Help (ChampioNman)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">Is the tech OMC/BRP certified? Or a I'll take a look at her? </TD></TR></TABLE>

    Boys I dont care how slow you read that "A" aint supposed to be there.

  17. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #17

    Re: Johnson 175 Problems.... Please Help (Bassmeister)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bassmeister &raquo;</TD></TR><TR><TD CLASS="quote">What Fred was saying, was he a mechanic that said he would look at it or a BRP/OMC technician</TD></TR></TABLE>

    Mike I think the "a" should have another word like (is) or a letter in there and I know you read slow.

  18. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,137
    #18

    Re: Johnson 175 Problems.... Please Help (ELGIN)

    Yeah mister make since (sense) the proper grammer should have been an instead of an A. As in an I'll take a look at her technician.

    Elgin in a previous life:




  19. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #19

    Re: Johnson 175 Problems.... Please Help (ChampioNman)

    I would expect a better response from a Garden Gnome...


    Relax Fred, just funnin ya!

  20. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,073
    #20

    Re: Johnson 175 Problems.... Please Help (ELGIN)

    Alls I can say Elgin.....Ya been "Up North Some'eres" WAAAYYYY tooooo long!!!!

Page 1 of 2 12 LastLast

Similar Threads

  1. Problems with a Johnson 175
    By waterrat in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-30-2012, 04:42 AM
  2. More problems with my Johnson 175
    By waterrat in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 10-08-2011, 10:45 AM
  3. 150 Johnson Problems
    By papa bear 54 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 06-26-2009, 01:03 PM
  4. 115 Johnson Problems
    By Apraser99 in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 04-17-2007, 09:33 AM
  5. Johnson problems
    By CobraRob in forum Evinrude/Johnson Motors
    Replies: 11
    Last Post: 08-24-2006, 07:40 PM