Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jan 2011
    Location
    Columbus Ohio
    Posts
    868

    Transducer setting

    Hi, I have a helix 9msi G3N. With a XM 9 HW MSI T and XP9HW and a y-cable. What should my transducer setting be on my unit? Thanks

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    32,001
    #2
    The default setting, first one listed.
    Nothing changed when you use the Y cable except the physical location of the 2D piezo.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 MEGA SI+ G4N, Helix 15 MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 MEGA SI+ G4N, Ultrex 80/Advanced, MEGA360,
    MEGA LIVE, LIVE TL, MEGA LIVE 2, Xplore 10

  3. Member
    Join Date
    Jan 2011
    Location
    Columbus Ohio
    Posts
    868
    #3
    Thank you Wayne!

  4. Member
    Join Date
    Jan 2011
    Location
    Columbus Ohio
    Posts
    868
    #4
    Wayne, for my own knowledge which setting should it be set on with my setup

  5. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    32,001
    #5
    Quote Originally Posted by jcyoung517 View Post
    Wayne, for my own knowledge which setting should it be set on with my setup
    The same setting for the MSI transducer alone==first one listed=default=HW:MEGA SI+

    Basically you don't mess with the Connected Transducer menu since nothing is changed. It comes from the factory set to the standard transducer for that model.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 MEGA SI+ G4N, Helix 15 MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 MEGA SI+ G4N, Ultrex 80/Advanced, MEGA360,
    MEGA LIVE, LIVE TL, MEGA LIVE 2, Xplore 10

  6. Member
    Join Date
    Jan 2011
    Location
    Columbus Ohio
    Posts
    868
    #6
    Well, that’s what I did …Thanks!