Quick Question

[JimGe]

Found some threads that said pigtails are already supposed to be there to late tonight to check but will in morning if I could find a way to delete this question I would but I can’t so sorry. Just bought a tracker 175 pro team want to add some electronics up front what is the best way to get power to them. A friend told me to wire into front trim switch but when I was checking it for hot and ground I was getting action from motor trim. Think I need to avoid using them. Do I need to run to fuse box or does tracker have wires up front for when they install electronics.

[Mort123]

There should be wires already there and ready to use. There was on my son-in-laws 2016 model.

[Topwater 2]

Wire your electronics directly to the battery but add and inline fuse.

[PatriotAW4]

There is a circuit up there but it is only good for one 9" unit or smaller. If you want more than that up front you need to pull a circuit back to the battery. Do not wire anything to the trim switch.

[Highcentered]

There should be wires already there and ready to use. There was on my son-in-laws 2016 model.

My 2016 either didn't have those wires or they were so well hidden I never found them and I looked several times including when I switched to a bigger tray for my Ultrex pedal. I just ran wires from front to the fuse panel under the dash. Worked fine for 7 years.