2015 Merc 250 pro xs
2B11537
Sorry about the silly question. I'm changing my LU gear lube and ran out or can't find the spare drain/fill washers (blue color), so I went and picked up some from BPS; Quicksilver part# 26-0M0183616 (yellow color). Will these in all motors or just some? I don't want to put it on yet and I often get it from a local marina but they're closed now. TIA!
yellow teflons will work fine
.................................................. ...the scariest thing in life is the unknown ...................................
Only ones I use!Originally Posted by JOE54
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
^^^^ me also
.................................................. ...the scariest thing in life is the unknown ...................................
Thanks for the input!! Appreciate it!
2015 Merc 250 pro xs
2B11537
Im trying to clean out the Strainer filter and removed all 4 screws but still can't loosen or remove the lower cowling? Do I have to remove the hose seal behind the engine to get the cowlings separated? what am I missing? TIA
Also- when I remove and install back the Strainer, how do know when stop turning the socket?, or should I mark it?
Sorry about multiple post of this thread..lol Idk my strainer question got here. LOL
Did you remove the gasket on the top of the lower cowling?
2013 BassCat Cougar
Serial # 1B962763
Yeah i did, I just realized that I had to wiggle it free from the starboard side lol
4motion- See if you can find the other digit for your serial number so you'll have it for the next time. :)
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
