Results 1 to 4 of 4
  1. #1

    whats best plugs for 200 rude

    whats the best plugs to run in my 1995 200 rude vindacator, I looked it up the chart on here. do ya,ll agree ? thanks



  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,186
    #2

    Re: whats best plugs for 200 rude (moefishin)

    QL78YC gapped at .030. Anything else your asking for problems.

  3. #3

    Re: whats best plugs for 200 rude (ChampioNman)

    thanks i was hopeing so, i just bought the boat an it has ngk r bpz8hs in it an they are staying oily.....and gapped at 45 i thought that wasnt right....whats your opinion on the oiler on this motor? are they ok? I had a 87 GT 150 an was told to unhook an mix by hand so i did an it did great.....any help is very thankful.....Moe



  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,186
    #4

    Re: whats best plugs for 200 rude (moefishin)

    Oiler is fine on all of them. If you want to and it is up to you unplug it. I have faith in the system and after about 35 years in the biz have seen about 3 VRO failures. And those were in the early years.

Similar Threads

  1. Champion Plugs vs. NGK plugs
    By ccuboy123 in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 10-27-2010, 11:21 AM
  2. Whats Good Whats bad
    By gman224 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 01-16-2010, 09:17 AM
  3. plugs for 05 Rude 225HO
    By Bassin Billy in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 08-30-2007, 08:04 PM
  4. Spark plugs for 02 rude 225 ho
    By jbradfishn in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 01-11-2007, 03:04 PM
  5. 96 rude
    By 2fast4u in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 05-08-2005, 07:03 PM