Removing white rubber dock rash from rub rail

[solecky]

Does anyone have an easy way to remove white rubber dock bumper residue from bass boat rubrail? See picture, thx in advance!

[Randrat]

I use fine steel wool. Works well and does not damage or scar the rubber.

[solecky]

Thx!

[BDBR]

A little acetone on a rag works well. Someone told me recently that Majic Eraser works well for removing all sorts of scuff marks... I haven't tried it yet myself

[troutspinner]

Yep, magic eraser will make your life easy. Be careful with it though and make sure the eraser is wet. It is still an abrasive even though it’s a sponge and can take the top clear finish off if you’re too aggressive.

[PaRiverRat]

Acetone or Isopropyl alcohol

[solecky]

Thx all!

[DaveBrabec]

Alcohol. Then use tire black

[solecky]

Acetone worked perfectly, removed it in seconds, thx!

[lpugh]

A buffer ran at it lowest speed setting 300 rpm or less, very little pressure with a foam pad.