Results 1 to 4 of 4
  1. 03-11-2022, 09:38 AM #1
    oscardog
    oscardog is offline
    Member
    Join Date
    Feb 2015
    Location
    Kansas City, Missouri
    Posts
    964

    Filling transducer bracket holes

    Not quite a restoration but I figured someone on here could possibly help me out. I'm needing to move my transducer bracket over a bit and need to fill the existing hole(s). What is the best product to use for this? The hull is white if that helps.
    Thanks
    Reply With Quote Reply With Quote
  2. rojoguio
    rojoguio is offline
    Member
    Join Date
    May 2015
    Location
    Kiln Mississippi
    Posts
    921
    #2 03-11-2022, 10:49 AM
    I inject the holes with thickened epoxy.
    Reply With Quote Reply With Quote
  3. Ranger Rod
    Ranger Rod is offline
    Member
    Join Date
    Oct 2019
    Location
    Keswick, Ontario
    Posts
    1,642
    #3 03-11-2022, 02:05 PM
    I used 3M 5200 (both sides)
    1997 Ranger 692VS
    2014 Mercury 175 Pro XS 2B111166
    Reply With Quote Reply With Quote
  4. jerzia
    jerzia is offline
    Member
    Join Date
    Apr 2007
    Location
    Rochester, NY
    Posts
    7,471
    #4 03-12-2022, 04:03 PM
    I would use Marine Tex. Put some on a toothpick and fill the holes as good as possible. Next day cover the holes with a bit more, but be sure to mask area close to holes and don't overfill much, that stuff is a bear to sand. When dry, sand it flush and you'll never see it.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »