looking for a couple things

[StetsonBasser]

I'm looking for a 70-90 horse outboard trim and tilt, doesn't necessarily have to run... but fixable for real short money.
Also a 40 or so lb thrust TM, foot controlled, not picky about brand... real short money also... i'm getting a little rig, but it's a low low budget setup.
If anyone knows of either of those let me know

[Earl320V]

I know where theres a 70 HP OMC,but doesn't have power trim, motor runs real good......but its not going to be cheap.. Aaron,I have a teleflex steering system,single cable,helm,no steering wheel 11' long cable,plus the cables for the shifter,and gas,also 11' long,if you need them, came off a OMC .$25.00 for everything. plus shipping,let me know real soon if you want,need them.

[Earl320V]

Aaron,everything thing you do is low budget!!!!!!!!!!

[critter]

i have a motorguide brute 50 lb foot controlled tm im am selling works fine just needs new cup bearings on the shaft and a plug for the wires email me if interested critterssilverado@yahoo.com

[xltrod]

I posted a motor guide for a guy on the Bubba Bassin classifides. http://WWW.bubbabassin.com. hope this helps. Rod

[StetsonBasser]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earl320V &raquo;</TD></TR><TR><TD CLASS="quote">Aaron,everything thing you do is low budget!!!!!!!!!!</TD></TR></TABLE>

I know, I know...

Power trim isn't a NECESSITY... however if I get one without it, it better be cheap
It's got a good steering cable and wheel all intact, so I won't need that, thanks though.

[StetsonBasser]

critter - you've got an email

[JerryT]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StetsonBasser &raquo;</TD></TR><TR><TD CLASS="quote">.. real short money also...but it's a low low budget setup.</TD></TR></TABLE>

No way really?? Thats so unlike you

[StetsonBasser]

I know shocking isn't it

Hey Rod, what's up with that free Evinrude TM on bubba's classifieds? I registered to try and ask about it, but i'm having computer issues so I can't log on to ask the guy if it's still available. Could you get me an email address from him?

[Earl320V]

Aaron has the first penny he ever earned,and is going to keep it............He should be a phone solicitor,he's that good.... I'll check to see what the guy wants for it tomorrow...

[StetsonBasser]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earl320V &raquo;</TD></TR><TR><TD CLASS="quote">Aaron has the first penny he ever earned,and is going to keep it.</TD></TR></TABLE>

I really don't, I'm only cheap because I have to be. I made some poor financial choices earlier in my life. I've since learned my lesson, however I'm still paying for the stupidity early on.

[plbass]

Hey maybe you can get BJ to pull you around a lake so you can fish, it worked for Jerry at the rally.

[StetsonBasser]

That's a good idea, I think I even have a pair of Flippers he can use, so I can go really fast

[Earl320V]

just kidding with you Aaron.....

[mongo]

Aaron,

I do not know if anyone has mentioned it but have you tried Barry's bait and tackle in Westboro Ma. He has / had some trolling motors that may be up for sale for short $$$$$. Let me know if you are interested and I will get you the contact info.

[cyclone70]

I have an old Minn Kota Powerdrive 32 or 36 lb. motor(electric steer)
The pedal is a little twitchy and it aint pretty but is yours if you want it.
It's been sitting there for a few years.
Someone might as well use it.

[StetsonBasser]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cyclone70 &raquo;</TD></TR><TR><TD CLASS="quote">I have an old Minn Kota Powerdrive 32 or 36 lb. motor(electric steer)
The pedal is a little twitchy and it aint pretty but is yours if you want it.
It's been sitting there for a few years.
Someone might as well use it.</TD></TR></TABLE>
Thanks for the offer Tyler, but I can't get the handle of those powerdrive ones...my buddy has one on his boat and for some reason I just can't get used to it. I may have something lined up with someone else on the boards for a foot controlled Motor Guide, just waiting for him to get back to me.

[cyclone70]

I don't blame you I prefer cable steer too.
Hopefully someone can hook you up.

[StetsonBasser]

Yup... i'm set on a trolling motor now, Just got confirmation

[JeffA]

i know it's not a 70-90, but i have a mint 1996 40hp merc/force with tilt/trim, skegguard, new prop, hydrofoil, and all the controls and wiring, and the keys for $950, and when i say mint....it's mint!
it pushed my 16' nitro filled with gear and 2 fat guys to 27mph