We need your engine model number please. There were several changes so we need to start at the beginning.
other questions.
What was the water pressure? When was the last time the water pump was...
Type: Posts; User: Bighare2
We need your engine model number please. There were several changes so we need to start at the beginning.
other questions.
What was the water pressure? When was the last time the water pump was...
All true on use of TCW3. But my question was asked because even premix a semi-synthetic oil usually emits less smoke as compared to a mineral based oil.
What synthetic blend are you referring to as compared to OMC 2 cycle? OMC had 2 blends and BRP Evirude has 3 blends.
A combination tach with water pressure would be a Ranger branded gauge. Would recommend you contact Ranger Boats for the replacement. As a guess, it’s possible Ranger sourced their gauges from Beede...
Are these obsolete from BRP?
It could be either one. You need to do some testing.
does the gauge show any movement when you turn the key on?
check the connections on the back of the gauge. There are three - power, ground...
What is the control arm you refer to? There is a drag link connecting from the engine steering arm to the end of the steering cable. The drag link is not used on hydraulic steering.
there is a...
The silver tips are a different material and better suited to todays fuels.
You are referring to the thrust washer an yes it does come off. Give a tap tap with a hammer to break it loose. It is sitting on a taper.
that would be true
What kind of parts, or part number of the steering system is the dealer ordering. Parts may be on back order.
++ to blkfalc4. And be sure to include the engine model number. Very important to help...
That part is not listed as separate part. You may need to do some scrounging around
The fuel filter is always a good practice. The spark plugs are stated for maintenance every 500 hours. So IMHO You change them when required.
Yes is the answer to air causing the air motor to cycle too rapidly. Yes it the answer to putting a clear line in the fuel inlet side.
see the very informative artical on VRO operation....
Go here to find the value https://www.jdpower.com/boats
Find your model number. Enter your zip code and the high and low values are listed.
It’s is your engine. Its charging system was designed for lead acid batteries. A failed regulator can push out 15 plus volts. It normally will not spike above 14.5 plus minus a volt, even in a heavy...
The proper hub kit is part number 177283 TBX Hub kit to fit a G1 EV. The kit includes the bronze bushing sleeve, the plastic torsion bushing and the main thrust washer.
The part number for a EV G2...
The parts catalog is the first place to go for the information. Go to Epc.brp.com. Plug the model number in to see every thing. There are different jets, which one? If you mean the main high speed...
1998 was one of the first model offerings. There were several important upgrades maybe even a recall or two from 1998 - 2000. Especially an upgrade to the fuel distribution rails.
Be sure to ask if...
++ to the McGard prop lock.
Need more description of what was wrong with the fit. Too big, too small?
Maybe not. Check the fitting at the fuel return fitting on the vapor separator. There is a small cone filter which is known to get clogged. Remove and clean or replace. Be careful when removing the...
HO stands for high output. Outboard manufacturers are allowed to rate engine HP with 10% margin up or down. So a 200HO is 220HP.
So a boat rated at 200HP can legally be equipped with the engine.
Yes of course and many more torque specs
Why not just get the service manual. http://www.selffixer.com/pdf/download.cgi?nf8wor02v90qbctmt7h the link is from the stickies at the top of this forum.
With all the work you have done and most...