Search:

Sorry, I didn't find one. check with Andrew I mentioned above. Facebook (936) 201-6396

I'll look & see if I have one. Might reach out to Andrew Golden at Golden's Boat Carpeting and More. He's converted some to rockers and may have some panels. If not, he may have a lead on some.

Abner, need an email address. It will be for the boat only. The outboard has its own manual.

You're talking just the plastic piece?

Doug, sent you schematics out of a Nov 98 manual which would be for 1999 model boats. That was the 1st year for the 193, so it’s as close as I have.

Think that one is Champion boat owners, not to be confused with ChampioN Boat Owners which is Bill Speer's group that a bunch of us belong to. I've underlined the difference in the group name. I...

Yeah this is JT Markovich's site. He's STLBassBuster here on BBC. He's also the Admin for Champion Boats Buyers & Sellers group on FB (Champion Boats Buyers & Sellers | Groups | Facebook). I'm a...

There's one for sale here on BBC, but it's in Iowa and red & white.

Boats4Sale5 (bassboatcentral.com) Scroll down to Viper

Just a curiosity on my part. I know the Mountain Home boats like the 203 that they kept into the 2004-2005 timeframe wasn't as fast once they moved the gas tank from the rear compartment forward to...

^ ^ ^ This ^ ^ ^

So, my question on the Lithium debate is have you noticed a difference in the ride, hole shot or trim (balance) losing all that weight in the back of the boat?

Yeah, I ordered bezels through R&R Design to swap out the old. Did what Faria send you matcb your others? If so I wouldn't mind that except I'd lime to keep the ChampioN faces on the tach and speedo.

Mine ae oxidized. Previous owner garaged it near the coast. My bezels were all eat up.

548300

Look closely at the gauge face. If they are Faria gauges, Faria will repair them. Before calling you'll need to ge the gauge part number off the side of the gauge.

TTT

Now that you have some pix, I have a HDS7 in my dash and Edward Cazares (FB) and The Other Big Ed (BBC) has a HDS9 in dash. Been going to reach out to him for pix and measurements. I'm about to...

Headed your way in a minute or two

I assume 93ish?

It should have a serial number stamped on the frame up front somewhere. Look on all sides on the tongue including any bracing.



94 won't be Dri Doc if it's original. It'll be TI div of EZ...

That SHO has more balls than a Merc 4S. I bet it'll do good with that 25.

In 94, if your trailer has brakes, they are drum type which UFP/Dexter no longer supports them. If you don't have brakes, contact EZ Loader Customs in Midway, AR with your VIN and they can provide...

My 07 is Rule. The replacement cartridge is 20RR if they are still available. Rule changed design at some point. Check that the housing doesn't have a crack or hole in the underside of it. If...

Short answer is yes. It's the gray wire. Long answer is you need to reace that shorted voltage regulator.

I agree with trashmanssd. Springs, no shocks. I also don't see the need in brakes on both axles. My 210 just has brakes on one axle and it is plenty and the 210 is a lot bigger/heavier boat. Just...

So did the wire break off? it's not part of the boat harness, probably associated with the outboard. What motor do you have?