GJ on persevering. I haven't been to Glen in probably 15 years. IIRC, there are some good docks, but it fishes "small" overall?
Spent 4 afternoon hours at Massabesic yesterday. Water's close to...
Type: Posts; User: bassboat1
GJ on persevering. I haven't been to Glen in probably 15 years. IIRC, there are some good docks, but it fishes "small" overall?
Spent 4 afternoon hours at Massabesic yesterday. Water's close to...
Yes, on every setup. It's rocky and clear here, with not much heavy cover. I do have to spool up a few reels with mono or fluoro for the beginnings and ends of the season here - I had some real...
Wore out the buck bass at Island Pond yesterday. Most bites were in 6"-2' on a spinnerbait. Bigger prespawn females (up to 3#) ate a crank bait (Bandit 200 and DT-6) on rockpiles in 10'. FWIW, both...
Excellent job making the most of that opportunity! Seven pound smallies...:eek:
Ugh! Thanks!
I think Baltimore needs a bridge.
I carry everything + the kitchen sink in the boat, but on kayak days, I'll happily fish out of one or two 3700 boxes.
I rely on the Anchor Rein that I put in the bow of the boat: put the end around the Drotto handle and back in, pull out, retrieve the rope and pull it to shore. Been doing it like that since 1989.
Took a rain off yesterday due to rain, so I hit one of the local lakes after it slacked off. Took me a while to figure it out, but the spawn was on. I saw pairs of both species, a good number of male...
Good to see you back in the saddle twitch!
https://www.youtube.com/watch?v=U8nFU3w-YEM
Ideally, grind out the unsound mortar and point (fill and tool to shape) with the correct mortar (probably type N). After it's set for a couple of weeks, wash off any haze with muriatic acid.
... hang on, we're still digging in our wallets for the cash :smile:
Alberto is excellent, if it fits through your guides OK. If your FG is "balling up" - the leader material isn't running straight through the woven braid, then you either have too much tension on the...
I've got a MK Maxxum bow mount/foot control with the continuously variable speed knob (not the 5 speed). The tension has weakened over time, and it's regularly being moved by accident. Is there a way...
Garmin 93SV UHD $700
LVS32 + GLS10 $1500
Perspective mode mount $100
Made some wiring changes at the same time:
10 ga wire ?$30
Fuse block $13
Breaker/disconnect $30
I bought a kayak just to tide me over until I found a boat for sale. I still use it for several no-ramp waterways. Since I keep all my tackle in the boat, taking the 'yak is a hassle compared to...
I like them to suspend dead still (although I do throw a Rapala Shadow Rap Shad slow sink at times). I finish my tuning on the water - mostly using Suspend-Dots and lead tape, which are easily...
We never let turkeys get old enough for that. Had my share of goose eggs though (preparing me for a future in bass fishing?)
Bill gets you.
https://www.youtube.com/watch?v=x0gaYyNk7QA
Those old Delta Contractor saws were workhorses. The tube fence rails were maybe the weak spot, if there was one.
Mine comes off the top of the port side head. These are the only pics I have handy.
549172
Routing:
549171
I update with no issues yet. 3/93SV UHD + LS
One note on the Ridgid vacs - make sure it will accept bags (if your use will require them). I run a 20 yo Craftsman (made by Emerson Electric) with bags and a Cleanstream Filter for drywall dust...
I ran the 8-1/2" Makita job saw for decades in a Rousseau-clone table until a couple of years ago (pro remodeler). I replaced it with the 10" Skil Wormdrive. Tons of power, good dust collection, loud...
