Search:

Yes sir it is and very concerning. I did narrow it down to the front down trim today. At this point I think it’s just about impossible to to figure out what caused it and it would not be a easy fix.

Thank you . Short is what i was thinking also and it is looking like that is what it is. I already tried all the switches like you mentioned.
Thanks again

My boat trim started working by itself going down. When I disconnect the 3 prong wiring harness that runs the front and the trim on the steering wheel trim. The trim will quit. However the trim on...

My boat trim started working by itself going down. When I disconnect the 3 prong wiring harness that runs the front and the trim on the steering wheel trim. The trim will quit. However the trim on...

Thank you
I guess I should have mention It does work it is just very weak. I have the whole thing removed already. I was thinking it was a motor problem and was going to replace it but now since I...

My 250 HO trim has quit working correctly it will still work but has no power and sometimes you have to tap on the trim motor to get it to move. I have changed all the fluid. When doing so I filtered...

Thanks Again,

25 was raker I was afraid that I would have to change it out when I have a load . Might try a four blade.
Thanks

25 prop was the first thing I tried and it done alright out the hole but the rpm' s was way high on top in so I brought the prop back.

I am not sure how many rpm's I am turning out the hole I will...

2013 Triton 20xs with 250 etec running a 26P txp prop. When I put a heavy load in the boat ( fish three Men) I blow out bad.The boat will not even get on plane .Do i need to try and go down on my...

I Have a triton 20 xs with a 2013 250 e-tec and 10 foot power poles that is very hard to come out of the hole with live wells full. I am running prop to pad, 3 .5 " and have a TXP Turbo 26p . i have...

Thanks everyone.

The reason I went with power poles instead of talons was all because of looks. I read up on both, and when I looked at the Talons the size of them scared me off. Both will work...

Got my power poles installed last week. what do y'all think?



http://i1172.photobucket.com/albums/r573/abyrd75/IMG_0386_zps1980c760.jpg

No power poles

I think it depends. I towed my 20xs with its custom cover and were the staps go under the boat it did rub.
On a white bottom boat i don't think you could tell but on my black bottom you could see...

No sir i dont .What would this do?

If your talking about the lights and alarms when you first start it . No they do not

I have a 2013 250 etec and Last week i was in some fairly rough water. When i would hit a big wave my motor would go into idle.( lose RPMs) I would then have to wait and let the boat come to a stop...

I am not the orginal poster. But i am not liking mine either i have a triton 20 xs and cant seem to get it prop'ed out right. If you know what runs best let me know and i will try it.

I have the 20xs and it has a big platform. I have heard of the triton chine walk but at 70 i can turn my wheel loose, turn and talk to my partner so i guess mine dont do it.LOL

I guess i should have worded it a little differt i ment the raker i had on before did not have any slack.

Its not a raker II because i neededa four balde. If it supose to have a 1/16" then i am good.
And yes did come with a thrush washer the old washer was too thick.
Thanks for the help.

I have a 2013 etec and had to change out my prop. I had to by a kit to change it out and it seems to have more slack in it, can somone tell me if it is normal to have a little slack? I know whem i...

I thought it was just me my xs is way harder to load then all the rest of the boats i have own.
I tried wetting the rails and the best way i have learned is to just wet them then just run it up as...

I cant say anything about the 19xs but I just bought a 20xs and i had to learn how to drive it in rough water. The boat i have is not rough but will ride the waves different. It just glides instead...