Just a little brain goes a long ways, some appears to be missing in that video!
Type: Posts; User: BroWhoop
Just a little brain goes a long ways, some appears to be missing in that video!
I may be wrong but I think people wanted the A43 as the blades were thinner. Helped speed! Don't remember exactly. My brother had one that the vent holes weren't round and we're fixed.
A40 is what...
I believe the recirc pulls from the bottom of the well and flows back into the top. Mine also has the air injected from above the rear deck into the recirc.
Ionic has a dual purpose 125. Don't know the tech end but rolls my SHO 250 great.
Gas gauge is a reference only. With the tank being L shaped with the narrow part at the top it can't be accurate. When full the gauge drops pretty quickly then gets to the wider part of the tank.
One thing, some fuel hoses have liners in them. If they have been disconnected and re-connected the liner can bunch up and restrict flow.
All good stuff!
It's me, it's me, it's Ernest T. Lots of good characters on that old show!
The plugs are only for holeshot. I'm running all stock 250 SHO, my main prop is a 26 SHO T1, my back up is a 27 Tempest with plugs in. I can't tell you wot rpm on the Tempest as I've on run it a few...
548547
My son and my brother!
Yes, except mine had a 5 spoke mag wheel on the rear and small wheel on the front. Of course with Evil Knievel antics the rear wheel broke and the replacement was a spoke wheel! :yesnod:
6 gauge wire, if in conduit, thhn #6. 2 blacks, white, green. Green doesn't have to be a 6, maybe not the white (local codes and NEC If the controls are electronic for the equipment you will need a...
2 things to help or stop rattling. Keep your boat on the hitch, preferred. Get heavier hitch (solid bar) and/or with multiple balls.
I use mine to see structure to throw at, except for crappie. Haven't been using it long, but for me it shows me what I want. I still blind cast a lot though, especially on cypress tree lakes.
Engine height, how the boat is loaded (weight distribution) and time.
That's strange, I've noticed every year my seat seems to be getting lower! :smile:
Yes, this happened to me. I lasted 5 years and quit. The company I worked for was a pretty large family owned (employees ranged 300 to 500). By the time 5 years had passed, the old company probably...
Black chromate screw!
There are pro's and con's on each side of this. All unions - locals are not equal. Some non union companies do offer good wages and pensions, others don't. I've worked in and around unions (draw a...
Yeehaw, she's happy! That's how all fishermen should be, if it doesn't make you happy, you should ?.
Tim Conway, one of a kind!
https://www.bbcboards.net/showthread.php?t=346131
Check this out! Have to read a lot of posts. Lots of setup notes. How the boat is loaded is important.
Comfort and peace to you and your family!
Runs my SHO and all the boat electrical great.