I had that happen when I was using the Mega Live directly into my Helix 15 without the network on line(I had sent my switches in for replacement). I could not get either of the remotes to effect any...
Type: Posts; User: venomvee
I had that happen when I was using the Mega Live directly into my Helix 15 without the network on line(I had sent my switches in for replacement). I could not get either of the remotes to effect any...
There are a few config screens under the Network settings you should check to enable the heading data to be used by the Solix. I am attaching some of them.
548018548019548020
I have a Point One providing heading on my Solix 1. I think it is configured under the network settings. I note that you said the Solix units are connected to your NMEA network, and that they are...
In your case, I would say a separate power switch is not needed if you routinely shut off the master disconnect when putting the boat up. Some like a separate power switch in case you want to power...
I would install or reinstall the app to your phone, making sure no old units that you may have removed are listed. Then boot up your boat network, then bluetooth pair your phone to one of your...
I've experienced random disconnects of my Ultrex I Pilot Link from the network since the Oct. update, and have been working to resolve the problem. I replaced my 2 older switches with the new model,...
The 5 port switch is a suspect, especially if you have an old switch and have it filled up with connections. I just replaced my 2 old switches with the new model to cure the same problem you are...
I believe FishSmart is no longer supported, and is replaced with the One Boat Network app.
I just received and installed the replacement ML transducer, fished with it yesterday. It worked perfectly with zero interference. Had it dialed in within a couple of minutes, and spent 2 hours...
Point well taken. SN 211103040104. Would that indicate manufactured in Nov of 2021?
I purchased my ML in Jan 2022, and I have the RFI trolling motor interference.
I just did that procedure on mine after the ML quit connecting to the network a few days after installing the new software. After testing the connection the way you said, ML has been connecting...
Yes, both can share Mega Live signal off of the network.
I concur with you about the trolling motor disconnect, and that probably will have to be resolved with software fix. I don't recall having an issue with that before now. As for the bait tracking...
I went out today with my Helix units, and was able to pretty much get rid of the trolling motor interference by setting auto sensitivity and contrast to on, with contrast up almost to max, then...
I am using the choke cable and am having trolling motor interference.
I have contacted Humminbird, and sent a link to a video clip of my experience. The process is started.
https://drive.google.com/file/d/1NVIGAuBQ8auRtQZeViCY1IFx6alg6nIY/view?usp=drive_link
I have to add my voice to the acknowledgement of trolling motor noise in ML image now with the latest update. Went out today and dialed everything in. Could not get rid of interference that appears...
That's right. I didn't think about that. I may reconsider if I miss that depth reading.
I have a Helix 15 SI at the Bow connected to M360 and Ultrex MDI transducer via Y cable. I find I don't use 2D or MDI up front, so was thinking of disabling the pinging of those sonars by selecting...
I have experienced a few sonar signals getting dropped from network in the past, but not having my view change abruptly while watching it. And today when it happened, I only had the one unit on the...
Went out on the water and test ran the new software on my Helix units. Didn't spend a lot of time on it, but got settings dialed in pretty quickly for a good image. However, it seems that my Helix is...
I tried this method yesterday, since the SD card from computer method failed to install. After transferring for about 2 hrs and 20 min, the progress bar went away, and nothing happened. I too...
I experienced the exact same thing today with my Helix 15 SI Gen4. I was sucessful loading my 12 MDI G4, and my 12 SI gen3 without issues. Will try on the water tomorrow. Am working with support to...
Looks like they have that new and improved network switch many have said is needed for the higher network traffic of all our stuff.