TC’s guess is prob the correct one. I have had that problem myself a long while back. If you are using the older grey sheathed cable replace it with the new black one.
Type: Posts; User: Sleepy111
TC’s guess is prob the correct one. I have had that problem myself a long while back. If you are using the older grey sheathed cable replace it with the new black one.
Luke, if you’re in the hunt for a TTR I can get you hooked up with a non BS deal. A good buddy of mine is the manager of a Yamaha dealer in cookeville Tn.
$350 for labor, which is prep and setup, on a talon is more believable than that other dealers $900 bike setup fee. A doc fee of $99 is prob the cheapest around still. Most all utv’s come ready to...
Those guys won’t last long charging prep fees like that. Couldn’t imagine prep and setup cost for bigger bike or a utv from them. A crf 125 in the crate only needs handle bars put on, front wheel and...
Toyota series tourney next weekend down there so I’m sure there’s enough boats to raise the water an inch or 2 for the next week.
We’re going for a few days in June. Just decided on a sudden short trip since we haven’t been in a while and for the time we are going to be there is the same time the synchronous fireflies are to...
The red will still eat the plastic away. Better off using marine Tex or epoxy.
It’s Will Lang, not sure if he’s here on BBC or not. He’s down in LA area.
He needs to get quite a bit of line of sight flights in first before jumping right into the goggles. That’s a whole different world. I have been flying quads and heli’s for many years and I still...
Guess you haven’t learned much around here either looks like. Upper right corner has a “search forum” link where you can do what you’re wishing for each forum page.
548677
The SS3D transducer is designed totally different than other lowrance transducers and others are not interchangeable to connect to the SS3D box. The SS3D transducer has 2 connector ends on it where...
I 2nd the cat pump recommendation. They are built right and will serve many years of use. I have a 4200 psi cat with a Honda gx390 that is over 25 years old and still going strong. Whenever I have to...
Redcat will never rival DJI, their r/c car line is like radio shack compared to associated, mugen, etc. I’ve been flying r/c helis for many years and started flying DJI quads when they first started...
I mostly keep it at 80ft and sometimes will bump it to 120 and still have good results. I keep my FFS under 100 all the time.
I have 360 on bottom and FFS on top, my hds for mapping is to the side thanks to a skinny nose boat.
Mega 360. I tried an AT2 in scout mode to see if I would like it enough to remove my 360 and it didn’t happen. Being able to see structure and schools of fish 10-120ft out, 360 deg around the boat...
It’s funny you made this post about the line tie. I use the originals and I cut off the crappy line tie and replace it with a Vmc #2 duolock, it has a lot more action with those. I haven’t ever...
I’m not making it complicated at all, I know the drill an hole and put a clip, pin, nail, cotter pin, etc method has been used for years now. I even helped my neighbor do it to his 9’s after he had...
You can create a page with side scan and down scan in a split screen and save it. It would be labeled/named favorite 6,7,8, etc. The preloaded combo pages lowrance has preset are named favorite 1-5...
Thats the ones I found first before I made this post. I may end up with those but going to make some with my 3d printer first from the link a few post up and see how they turn out first.
I really appreciate this, the locking system is the same. I do have a couple, an fdm and a resin, i will put one to work on a couple of these.
I may even just go that route or may just do some safety wire loops since I still have all that stuff from my motocross days.
Im just curious on something for more of a piece of mind too, I’ve got a couple friends with the 93sv’s and they had there’s come out of the cradle a few times each. I may try the DD26 clip or might...
What is everyone using, if any, for cradle locks to keep the unit from coming out while running or trailering. Or is it even that much of a problem like the 93’s we’re experiencing. Is anyone using...
Seen someone else had that happen before. Take the back off and put it back in place. I haven’t done it but it is fixable or send it in to get fixed.