Search:

I ran a 25 trophy plus on a 02 cougar/225 opti for a couple yrs. Holeshot was good ,much better than my tempest 26 which was the only other prop I had at the time to compare . Gave up a couple mph to...

the gamakatsu hooks that we always used on our tube jig heads were longer from eye to 90 bend . always had to modify mold to fit

thanks for your help guys , going to take a closer look next time I'm over at his shop . Maybe everything I need is there .
Keith

Thanks for the picture alli . That's the same kit we have , just comparing it to the hub kit I have for my XS , the hub kit I have has a bushing that fits inside of the long plastic sleeve and butts...

ChampioNman suggested I move this over here and see if anyone else has a suggestion

Friend wants to try my fury prop on his G2 powered ranger . Already purchased the hub kit ( 7220 ) for mercury...

Friend wants to try my fury prop on his G2 powered ranger . Already purchased the hub kit ( 7220 ) for mercury on a 200-300 hp G2 . Went to mount it up and it seems like we are missing a part that I...

Just put a 25 fury 4 on a cougar /225 xs . No plugs needed for mine . It also seems to like to run higher than the trophy that I took off .

Depends on your idea of rough . On Erie and St.Clair they will definitely slip with 900 series HB and thats with using slip joint pliers to tighten . Always had to fold them down on rough days .

A lot of guys running erie and st. clair on a regular basis are using the ram mounts from boat to electric motor . Handles the force up and down when locked tight . Make sure the base on the boat is...

You can save yourself a few bucks on the fluid . Seastar instructions give you a list of mil. spec. fluids that are compatible and some of them are available at your local airport used in controls...

Use them all the time on erie and st. clair . It's the only way you can fish some days . Every type of boat seems to react differently to where you tie them on , some like to drift straight ahead ,...

When I bought my ring for my trophy mechanic told me to put the ring in a pan of hot water for a few minutes and then just tap it on with hammer and block. Been there for years now with no problems.

There will be screws up a couple inches from the very bottom of seats . On my cougar had to tilt seat bottoms forward and then find the small slits in the seat cover and the heads of the screws will...

858c DI with white cover on 11.5 x 6.5 x 3 . Don't have a pic , mines not mounted on the dash .

I've got a cougar with a 225 and all I fish is Erie and St. Clair and the adjoining rivers and I've found that the trophy with the weed ring and a lot of playing with pvs plugs was the best option ....

Thanks Don , just waiting to hear back from mechanic . Whats the down side to not having throttle/TPS return fully every time ? I had a stiff cable and replaced it but I don't think that this problem...

I've got an 2002 225 opti thats got me and the mechanic stumped . First start up of the morning it will rev up to approx 3500 rpm for a second and then return to regular rpm but idle rough . After...

yesterday about 4 miles out from blastoff I get an alarm from my 225 opti . Slow down to idle , check gauges , running a little rough , so I shut down and scroll through smartcraft gauges . Shows...