It's not just out west. My home lake fluctuates tremendously in the spring and fall. If the mapping is done during this time and the daily fluctions not accounted for then, the offset changes...
Type: Posts; User: LWINCHESTER2
It's not just out west. My home lake fluctuates tremendously in the spring and fall. If the mapping is done during this time and the daily fluctions not accounted for then, the offset changes...
The new update made no changes to the LiveScope GLS10 software. The last time it was changed was June 30, 2023 when it went to from v2.63 to v2.74 go allow the selection of the Garmin trolling motor...
The only version that I know of that presented problems was GLS v2.30 that was the first release for Perspective Mode (2/18/2020). In addition to the evidence offered by users, the fact that Garmin...
If I was in your situation I'd be looking for a different cause of the problem. If the problem you are having is caused by the software update, there are sure going to be a lot of people with the...
I don't read much about LVS for trolling. Guess maybe I'm not looking in the right places. I don't troll, but if I did you can bet I would have an LVS62 pointed forward to locate fish to troll...
This used to be how on echomaps, but I don't know if current units use it.
Start with the device powered off
Press and hold the Home and Power buttons
Continue to hold both buttons until "Delete...
No. Ethernet cable. A bad ethernet cable or connection can lock up a unit.
I can't think of one.
Unplug it from the network. Reboot. If that works try a different cable.
Yes. You probably will want to go into the system and rename them so you know which one is which, like LVS34P ans LVS34S.
You can see the units on the dowload page. It's v35.10. Some of the older units can't use it. Also the later echomaps have it in their update.
No. The 12 to 8 pin cable won't work for this. The 12-pin side connects to the unit and 8-pin side connects to an 8-pin transducer. The 8-pin end will not connect to the unit.
You can connect...
Measure it. The GT30 is less than 8 inches long. The GT36 is longer than 8 inches.
For the six---Just to show it's possible. Before this update only two traditional sonars could be displayed and the process was cumbersome and restrictive. To show two, you had to put Traditional...
The GPSMAP update offers a lot more flexibility in setting up combo screens. Here are a couple of examples on a 1643xsv.
Your echomap requires power 9-18volts. Your GLS10 requires 10-32volts to be supplied. There is no difference in the picture if the voltage is within these ranges.
Adding these extra units place...
It shares through the ethernet port. Ethernet cable from this unit to another compatible unit or to a GMS10 box with additional ethernet ports. Ethernet=sharing sonar and waypoints.
Before the...
If you press and hold HOME until the screen blinks, a screenshot is saved to the sd card in a directory named /Garmin/Screenshots.
It will be an excellent copy of the screen. Pics taken with a cell...
Need to see a screenshot of that.
I think you mean LVS62.
If you are referring to the 12-pin transducer connector you probably don't have to narrow your selection to 93sv. Most Garmin units use this connector.
The correct mounting of the LVS on a plumb TM shaft or stick is to insure that the three arrays of elements are pointed properly. For the Forward Orientation, one array is horizontal, one is tilted...
I know that side imaging has a huge dedicated following. While I use it at times, I don't generally use it for what most advocates promote---structure. For me, my best use is to inventory an area...
That's what I do but I use the Y cable so that it only uses one port. I have 2 16 in units and show the left side on one and the right side on the other. It's a dramatic improvement over showing...
lakes.garmin.com
